Faculty of Chemistry, Bu-Ali Sina University, Hamedan, Iran.
Immunology Research Center, Tabriz University of Medical Sciences, Tabriz, Iran.
Anal Chem. 2020 Aug 18;92(16):11405-11412. doi: 10.1021/acs.analchem.0c02357. Epub 2020 Aug 4.
This work presents an effective strategy for the well-oriented immobilization of antibodies in which boronic acid is directly attached to the surface and with no need of the long and flexible spacer. A magnetic graphene nanoribbon-boronic-acid-based immunosensor was developed and tested for the impedimetric detection of lymphoma cancer cells, a blood cancer biomarker. Magnetic graphene nanoribbons (MGNRs) were modified with boronic acid (BA) to create a supporting matrix that is utilized by immobilizing anti-CD20 antibodies with good orientation. The prepared biosensing layer (MGNR/BA/Ab) with well-oriented antibodies was premixed into whole blood samples to interact with lymphoma cancer cell receptors. In the presence of target cell receptors, an immunocomplex was formed between anti-CD20 antibodies and lymphoma cancer cell receptors. Then, the biosensing layer was magnetically collected on a screen-printed carbon electrode (SPCE) and placed in a homemade electrochemical cell configuration to measure impedimetric signals. The fabrication steps of the immunosensor were characterized by various techniques, such as resonance light scattering, fluorescence, electrochemical impedance spectroscopy, and cyclic voltammetry. The assay is highly sensitive: the calculated limit of detection of lymphoma cancer cells was as low as 38 cells/mL, and the detection was linear from 100 to 1 000 000 cells/mL. The specificity of the immunosensor is also very high, and there is no interference effect with several potential interferents, such as the breast cancer (MCF-7), human embryonic kidney (HEK293), and leukemia (HL-60 and KCL-22) cell lines. The performance of the immunosensor for lymphoma cancer cells in clinical blood samples is consistent with that of commercial flow cytometric assays.
这项工作提出了一种将抗体有效固定的策略,其中硼酸直接连接到表面,而不需要长而灵活的间隔物。开发了一种基于磁性石墨烯纳米带-硼酸的免疫传感器,并用于检测淋巴瘤癌细胞(一种血液癌症生物标志物)的阻抗检测。磁性石墨烯纳米带(MGNRs)经过硼酸(BA)修饰,形成支撑基质,用于固定具有良好定向性的抗 CD20 抗体。将具有良好定向性的抗体的制备生物传感层(MGNR/BA/Ab)预先混入全血样本中,与淋巴瘤癌细胞受体相互作用。在存在靶细胞受体的情况下,抗 CD20 抗体和淋巴瘤癌细胞受体之间形成免疫复合物。然后,将生物传感层通过磁场收集在丝网印刷碳电极(SPCE)上,并放置在自制的电化学电池配置中以测量阻抗信号。通过各种技术,如共振光散射、荧光、电化学阻抗谱和循环伏安法,对免疫传感器的制造步骤进行了表征。该测定法具有很高的灵敏度:计算出的淋巴瘤癌细胞的检测限低至 38 个细胞/mL,检测范围从 100 到 1000000 个细胞/mL 呈线性。免疫传感器的特异性也非常高,与几种潜在的干扰物(如乳腺癌(MCF-7)、人胚肾(HEK293)和白血病(HL-60 和 KCL-22)细胞系)没有干扰作用。免疫传感器在临床血液样本中对淋巴瘤癌细胞的性能与商业流式细胞术检测一致。