Int J Oral Maxillofac Implants. 2020 Jul/Aug;35(4):789-798. doi: 10.11607/jomi.7916.
To analyze risk factors affecting sinus membrane perforation (SMP) during sinus floor elevation (SFE) procedures using the lateral window technique (LWT).
For patients with SFEs using the LWT, patient-related risk factors (age/sex/smoking/diabetes) and surgical-anatomical-related risk factors (stage approach/sinus side/residual ridge height/sinus membrane thickness/previous surgical interventions) were compared between perforated and nonperforated sites and were evaluated for their influence affecting SMP. Additionally, SMPs were further subdivided into small/moderate (< 10 mm) or large (≥ 10 mm) in dimension, which were also analyzed for risk factors and consecutively for their influence on perforation.
The study sample comprised 434 SFE procedures in 355 patients; 94/355 patients (26.5%) presented SMP in 103 of 434 SFE procedures (23.8%). SFE procedures with (n = 103) and without (n = 331) SMP did not differ for patient-related risk factors but differed significantly (P = .001) for surgical-anatomical factors as follows: residual ridge height (3.05 ± 1.35 mm vs 4.15 ± 1.46 mm), sinus membrane thickness (1.2 ± 0.5 mm vs 2.6 ± 1.1 mm), prevalence of staged procedures (78.6% vs 57.7%), presence of maxillary sinus septa (75.7% vs 14.2%), presence of thin (< 1.5 mm) mucosa biotype (62.1% vs 29%), and previous oral surgical interventions (37.9% vs 16.3%). In the multivariate analysis, significant associations of SMP were found with the presence of sinus septa (odds ratio [OR] = 31.992; P = .001), residual ridge height (OR = 1.563; P = .007), sinus membrane thickness (OR = 1.057; P = .001), presence of thin (< 1.5 mm) sinus biotype (OR = 8.883; P = .001), previous surgical interventions (OR = 4.689; P = .002), and smoking habits (OR = 2.238; P = .030). For inducing a large (≥ 10 mm) SMP, the presence of thin sinus membrane thickness/thin sinus membrane biotype (OR = 5.319; P = .006; OR = 22.222; P = .001) and reduced alveolar ridge height (OR = 0.629; P = .026) were assessed as being significant risk factors.
In general, the presence of sinus septa, thin sinus mucosa, staged procedures, and previous surgical interventions are the main risk factors inducing SMP for SFE using the LWT. In particular, the presence of thin sinus membrane in conjunction with a staged procedure significantly increases the risk for a large SMP.
使用外侧壁开窗技术(LWT)分析鼻窦底提升(SFE)术中影响鼻窦膜穿孔(SMP)的风险因素。
对于使用 LWT 进行 SFE 的患者,比较穿孔和非穿孔部位的患者相关风险因素(年龄/性别/吸烟/糖尿病)和手术解剖相关风险因素(阶段方法/鼻窦侧/剩余牙槽嵴高度/鼻窦膜厚度/先前的手术干预),并评估其对 SMP 的影响。此外,还将 SMP 进一步细分为小/中度(<10mm)或大(≥10mm),并分析这些穿孔的风险因素及其对穿孔的影响。
研究样本包括 355 名患者的 434 例 SFE 手术;94/355 名患者(26.5%)在 434 例 SFE 手术中的 103 例(23.8%)中出现 SMP。有 SMP 的 SFE 手术(n=103)与无 SMP 的 SFE 手术(n=331)在患者相关风险因素方面没有差异,但在手术解剖因素方面存在显著差异(P=0.001),具体如下:剩余牙槽嵴高度(3.05±1.35mm 比 4.15±1.46mm)、鼻窦膜厚度(1.2±0.5mm 比 2.6±1.1mm)、分期手术的发生率(78.6%比 57.7%)、上颌窦间隔的存在(75.7%比 14.2%)、薄(<1.5mm)黏膜生物型的存在(62.1%比 29%)和先前的口腔手术干预(37.9%比 16.3%)。在多变量分析中,发现 SMP 的显著关联因素包括鼻窦间隔的存在(比值比[OR] = 31.992;P=0.001)、剩余牙槽嵴高度(OR = 1.563;P=0.007)、鼻窦膜厚度(OR = 1.057;P=0.001)、薄(<1.5mm)鼻窦生物型的存在(OR = 8.883;P=0.001)、先前的手术干预(OR = 4.689;P=0.002)和吸烟习惯(OR = 2.238;P=0.030)。对于诱导大(≥10mm)SMP,发现薄的鼻窦膜厚度/薄的鼻窦膜生物型(OR = 5.319;P=0.006;OR = 22.222;P=0.001)和降低的牙槽嵴高度(OR = 0.629;P=0.026)是显著的风险因素。
一般来说,鼻窦间隔、薄的鼻窦黏膜、分期手术和先前的手术干预是使用 LWT 进行 SFE 时引起 SMP 的主要危险因素。特别是,薄的鼻窦膜与分期手术同时存在会显著增加大 SMP 的风险。