Vieira Thiago, Alexandria Adílis K, Amaral Lilian H, Neves Aline de A, Lopes Ricardo T, Cabral Lúcio M, Valença Ana M G, Maia Lucianne C
Department of Pediatric Dentistryand Orthodontics, School of Dentistry, UFRJ - Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil.
School of Pharmacy, UFRJ - Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, Brazil.
Braz Dent J. 2020 Sep 4;31(4):423-430. doi: 10.1590/0103-6440202002531.
The aim of this study was to assess the effect of a newly developed nanocomplex formed of hydroxypropyl-b-cyclodextrin and 1% titanium tetrafluoride (TiF4) after distinct complexation periods (12/72 h) on demineralization of bovine enamel in vitro. Enamel blocks (n=60) were allocated in different groups: Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4, hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h of complexation and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation. The samples were evaluated by surface microhardness, cross-sectional microhardness and micro-CT. Scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDX) were also obtained. Hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h complexation resulted in lower percentage of surface microhardness loss compared to Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4 and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation group, with a large effect size (from 1.307 to 2.943) and high power (84.9 to 99%). All groups resulted in similar integrated mineral loss (ΔZ) obtained by both internal microhardness and micro-CT techniques. Enamel treated with TiF4 and TiF4 + hydroxypropyl-b-cyclodextrin groups showed a TiO2 glaze-layer, while EDX evaluation identified Ti. The solution containing the inclusion complex of hydroxypropyl-b-cyclodextrin + TiF4 with 12 h of complexation period demonstrated a significant ability to reduce surface demineralization of sound enamel under an artificial cariogenic challenge.
本研究的目的是评估由羟丙基-β-环糊精和1%四氟化钛(TiF4)形成的新型纳米复合物在不同络合时间(12/72小时)后对牛牙釉质体外脱矿的影响。将牙釉质块(n = 60)分配到不同组:超纯水、羟丙基-β-环糊精、1% TiF4、络合12小时后的羟丙基-β-环糊精 + 1% TiF4以及络合72小时后的羟丙基-β-环糊精 + 1% TiF4。通过表面显微硬度、横截面显微硬度和显微CT对样品进行评估。还进行了扫描电子显微镜和能量色散X射线光谱分析(SEM/EDX)。与超纯水、羟丙基-β-环糊精、1% TiF4以及络合72小时后的羟丙基-β-环糊精 + 1% TiF4组相比,络合12小时后的羟丙基-β-环糊精 + 1% TiF4导致表面显微硬度损失百分比更低,效应量较大(从1.307至2.943)且效能较高(84.9%至99%)。所有组通过内部显微硬度和显微CT技术获得的综合矿物质损失(ΔZ)相似。用TiF4和TiF4 + 羟丙基-β-环糊精处理的牙釉质组显示出TiO2釉层,而EDX评估鉴定出了Ti。含有络合时间为12小时的羟丙基-β-环糊精 + TiF4包合物的溶液在人工致龋挑战下具有显著降低完好牙釉质表面脱矿的能力。