School of Mechanical Engineering, Nanchang University, Nanchang, China.
School of mechanical and vehicle engineering, Nanchang Institute of Science and Technology, Nanchang, China.
Sci Prog. 2020 Jul-Sep;103(3):36850420953642. doi: 10.1177/0036850420953642.
Collaborative robot has been widespread application prospect, such as homes, manufacturing, and health-care etc. In physical human-robot interaction, the external force appears inevitably in contact with environment or human, especially the interactive tasks such as trajectory tracking requirements and force compliance control. In this article, a method based on interaction intention estimation, which solve the problem of trajectory tracking accuracy and force compliance control in the same direction for the 7-DOF robot, is proposed. The increased virtual force depended on the manipuility performance index and inverse kinematic solution used the kinematic decoupling method based on the redundant angle avoid the singularity of redundant robot. Then, based on interactive intention estimation, a control strategy of variable impedance sliding mode theory in the presence of virtual force and contact force is proposed to achieve the trajectory tracking. We adopted hyperbolic tangent function to alleviate the chattering problem caused by switch function and validated the control system stability by Lyapunov theorem. Finally, Matlab simulations exhibit a 97.8% of high tracking accuracy amid the external force is 43% less than variable impedance parameters. It is therefore proved that the proposed method can achieve asymptotic tracking and the compliant behavior in physical human-robot interaction.
协作机器人在家庭、制造业和医疗保健等领域具有广泛的应用前景。在物理人机交互中,与环境或人类接触时不可避免地会出现外力,特别是在需要轨迹跟踪和力顺应控制的交互任务中。本文提出了一种基于交互意图估计的方法,该方法解决了 7 自由度机器人在同一方向上的轨迹跟踪精度和力顺应控制问题。增加的虚拟力取决于可操作性性能指标,并且基于运动学解耦方法的逆运动学解利用冗余角度避免了冗余机器人的奇点。然后,基于交互意图估计,提出了一种在存在虚拟力和接触力的情况下的变阻抗滑模控制策略,以实现轨迹跟踪。我们采用双曲正切函数来缓解由开关函数引起的抖振问题,并通过 Lyapunov 定理验证了控制系统的稳定性。最后,Matlab 仿真结果表明,在外力为变阻抗参数的 43%时,跟踪精度高达 97.8%。因此,证明了所提出的方法可以在物理人机交互中实现渐近跟踪和顺应行为。