Lucisano Andrea, Giannaccare Giuseppe, Pellegrini Marco, Bernabei Federico, Yu Angeli Christy, Carnevali Adriano, Logozzo Laura, Carnovale Scalzo Giovanna, Scorcia Vincenzo
Department of Ophthalmology, University Magna Graecia of Catanzaro, Viale Europa, 88100 Catanzaro, Italy.
Ophthalmology Unit, S. Orsola-Malpighi University Hospital, Via Palagi 9, 40138 Bologna, Italy.
J Ophthalmol. 2020 Sep 3;2020:5496162. doi: 10.1155/2020/5496162. eCollection 2020.
To evaluate the feasibility and the initial outcomes of a novel standardized surgical technique of femtosecond laser- (FSL-) assisted big-bubble deep anterior lamellar keratoplasty (BBDALK) for eyes with keratoconus.
This prospective interventional case series included 11 consecutive FSL-assisted BBDALK procedures performed for the eyes with keratoconus from September 2019 to December 2019. The FSL was used to create (i) an intrastromal channel incision (1.7 mm in length, 4.6 mm in width, 80% depth, and cut energy of 1.70 J) and (ii) a 9.0 mm diameter circular lamellar side cut 65 m above the endothelium (cut energy of 0.90 J) intersecting the intrastromal incision. In the operating room, a blunt dissector was used to open the intrastromal channel incision, through which a blunt spatula was inserted, tangentially advanced towards the center of the cornea, and replaced with a blunt cannula for pneumatic dissection. The subsequent surgical steps did not differ from the conventional technique. Main outcome measures were the success rate of pneumatic dissection and the percentage of intraoperative complications.
Eleven eyes of 11 patients (6 males and 5 females; mean age: 34.54 ± 13.23 years) underwent FSL-assisted DALK. Using the FSL, both corneal incisions (lamellar side cut and intrastromal channel incision) were successfully created in all cases without the need for repeat docking or additional dissection. Pneumatic dissection with type 1 bubble formation succeeded in all 11 eyes (100%). DALK surgery was completed uneventfully in all cases. Descemet membrane perforation did not occur in any case, and no procedure was converted to penetrating keratoplasty.
Using standardized FSL parameters for both incision design and cut energy in BBDALK surgery, pneumatic dissection can be achieved in a very high rate of cases with minimal risk of intraoperative complications.
评估一种新型标准化手术技术,即飞秒激光辅助大泡深板层角膜移植术(BBDALK)治疗圆锥角膜的可行性及初步疗效。
本前瞻性干预性病例系列研究纳入了2019年9月至2019年12月期间连续为圆锥角膜患者实施的11例飞秒激光辅助BBDALK手术。飞秒激光用于制作:(i)一个基质内通道切口(长1.7毫米、宽4.6毫米、深度为80%、切割能量为1.70焦耳);(ii)一个直径9.0毫米的圆形板层侧切,在内皮上方65微米处(切割能量为0.90焦耳),与基质内切口相交。在手术室中,使用钝性剥离器打开基质内通道切口,通过该切口插入一个钝性刮铲,向角膜中心方向切线推进,然后用钝性套管替换进行气体剥离。后续手术步骤与传统技术无异。主要观察指标为气体剥离成功率及术中并发症发生率。
11例患者的11只眼(6例男性,5例女性;平均年龄:34.54±13.23岁)接受了飞秒激光辅助的深板层角膜移植术。使用飞秒激光,所有病例均成功制作了两个角膜切口(板层侧切和基质内通道切口),无需重复对接或额外剥离。11只眼中均成功形成了1型气泡进行气体剥离(100%)。所有病例的深板层角膜移植手术均顺利完成。无一例发生后弹力层穿孔,也没有任何手术转为穿透性角膜移植术。
在BBDALK手术中,使用标准化的飞秒激光参数进行切口设计和切割能量设置,气体剥离成功率很高,术中并发症风险极小。