• 文献检索
  • 文档翻译
  • 深度研究
  • 学术资讯
  • Suppr Zotero 插件Zotero 插件
  • 邀请有礼
  • 套餐&价格
  • 历史记录
应用&插件
Suppr Zotero 插件Zotero 插件浏览器插件Mac 客户端Windows 客户端微信小程序
定价
高级版会员购买积分包购买API积分包
服务
文献检索文档翻译深度研究API 文档MCP 服务
关于我们
关于 Suppr公司介绍联系我们用户协议隐私条款
关注我们

Suppr 超能文献

核心技术专利：CN118964589B侵权必究
粤ICP备2023148730 号-1Suppr @ 2026

文献检索

告别复杂PubMed语法，用中文像聊天一样搜索，搜遍4000万医学文献。AI智能推荐，让科研检索更轻松。

立即免费搜索

文件翻译

保留排版，准确专业，支持PDF/Word/PPT等文件格式，支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述，25分钟生成高质量综述，智能提取关键信息，辅助科研写作。

立即免费体验

AA2519-AA1050-Ti6Al4V爆炸焊接层压板的力学性能分析

Mechanical Properties Analysis of the AA2519-AA1050-Ti6Al4V Explosive Welded Laminate.

作者信息

Szachogluchowicz Ireneusz, Sniezek Lucjan, Slezak Tomasz, Kluczyński Janusz, Grzelak Krzysztof, Torzewski Janusz, Fras Teresa

机构信息

Institute of Robots & Machine Design, Faculty of Mechanical Engineering, Military University of Technology, 2 Gen. S. Kaliskiego St., 00-908 Warsaw 46, Poland.

French-German Research Institute of Saint-Louis (ISL), 5 rue du Général Cassagnou, 68301 Saint-Louis, France.

出版信息

Materials (Basel). 2020 Sep 30;13(19):4348. doi: 10.3390/ma13194348.

DOI:10.3390/ma13194348
PMID:33007877
原文链接:https://pmc.ncbi.nlm.nih.gov/articles/PMC7579600/
Abstract

Explosively welded layered materials made of (a) an AA2519 aluminum alloy (AlCuMgMn + ZrSc), (b) titanium alloy Ti6Al4V and (c) an intermediate layer composed of a thin aluminum alloyed AA1050 layer are considered herein. This study presents test results connected to measurement science including microstructural observations of the material combined with the explosive method, and a basic analysis of the strength properties based on microhardness and tensile tests. Owing to the joint's special manufacturing conditions, the laminate was subjected to deformation measurements with the digital image correlation (DIC) method. The research was supplemented by the residual stress measurements with the sin2ψ X-ray method based on the diffraction-reflection analysis that was verified by the bore trepanation method.

摘要

本文研究了由以下材料制成的爆炸焊接层状材料

(a) AA2519铝合金（AlCuMgMn + ZrSc）、(b) 钛合金Ti6Al4V以及(c) 由薄铝合金化AA1050层组成的中间层。本研究展示了与测量科学相关的测试结果，包括结合爆炸方法对材料进行微观结构观察，以及基于显微硬度和拉伸试验对强度性能进行的基础分析。由于接头的特殊制造条件，采用数字图像相关（DIC）方法对层压板进行了变形测量。基于衍射反射分析的sin2ψ X射线法进行了残余应力测量，并用钻孔套钻法进行了验证，以此对研究进行补充。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/3357b22d1aeb/materials-13-04348-g013.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/a2ac27818a32/materials-13-04348-g001.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/38156a59417d/materials-13-04348-g002.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/9f81342a271c/materials-13-04348-g003.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/200de9787e1e/materials-13-04348-g004.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/963e29c402e0/materials-13-04348-g005.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/6d44b46e4c0d/materials-13-04348-g006.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/6aeb7ba1e852/materials-13-04348-g007.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/411f5918d96d/materials-13-04348-g008.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/80525f20f535/materials-13-04348-g009.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/fb052f8de92e/materials-13-04348-g010.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/7fb2d8b945ba/materials-13-04348-g011.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/48864c5d7e80/materials-13-04348-g012.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/3357b22d1aeb/materials-13-04348-g013.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/a2ac27818a32/materials-13-04348-g001.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/38156a59417d/materials-13-04348-g002.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/9f81342a271c/materials-13-04348-g003.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/200de9787e1e/materials-13-04348-g004.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/963e29c402e0/materials-13-04348-g005.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/6d44b46e4c0d/materials-13-04348-g006.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/6aeb7ba1e852/materials-13-04348-g007.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/411f5918d96d/materials-13-04348-g008.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/80525f20f535/materials-13-04348-g009.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/fb052f8de92e/materials-13-04348-g010.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/7fb2d8b945ba/materials-13-04348-g011.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/48864c5d7e80/materials-13-04348-g012.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fc92/7579600/3357b22d1aeb/materials-13-04348-g013.jpg

相似文献

1
Mechanical Properties Analysis of the AA2519-AA1050-Ti6Al4V Explosive Welded Laminate.AA2519-AA1050-Ti6Al4V爆炸焊接层压板的力学性能分析
Materials (Basel). 2020 Sep 30;13(19):4348. doi: 10.3390/ma13194348.
2
Mechanical Properties Analysis of Explosive Welded Sheet of AA2519-Ti6Al4V with Interlayer of AA1050 Subjected to Heat-Treatment.对带有AA1050中间层的AA2519-Ti6Al4V爆炸焊接板材进行热处理后的力学性能分析
Materials (Basel). 2022 Jun 6;15(11):4023. doi: 10.3390/ma15114023.
3
Investigation of the Fracture Process of Explosively Welded AA2519-AA1050-Ti6Al4V Layered Material.爆炸焊接AA2519-AA1050-Ti6Al4V层状材料断裂过程的研究
Materials (Basel). 2020 May 13;13(10):2226. doi: 10.3390/ma13102226.
4
Analytic Model of Maximal Experimental Value of Stress Intensity Factor K for AA2519-AA1050-Ti6Al4V Layered Material.AA2519-AA1050-Ti6Al4V层状材料应力强度因子K的最大实验值解析模型
Materials (Basel). 2020 Oct 6;13(19):4439. doi: 10.3390/ma13194439.
5
Microstructure and Residual Stresses of AA2519 Friction Stir Welded Joints under Different Heat Treatment Conditions.不同热处理条件下AA2519搅拌摩擦焊接头的微观结构与残余应力
Materials (Basel). 2020 Feb 12;13(4):834. doi: 10.3390/ma13040834.
6
TIG welding of Ti6Al4V alloy: Microstructure, fractography, tensile and microhardness data.Ti6Al4V合金的钨极惰性气体保护焊：微观结构、断口分析、拉伸及显微硬度数据。
Data Brief. 2021 Aug 11;38:107274. doi: 10.1016/j.dib.2021.107274. eCollection 2021 Oct.
7
Influence of Impact Velocity on the Residual Stress, Tensile Strength, and Structural Properties of an Explosively Welded Composite Plate.冲击速度对爆炸焊接复合板残余应力、抗拉强度及结构性能的影响
Materials (Basel). 2020 Jun 12;13(12):2686. doi: 10.3390/ma13122686.
8
Research on the Properties and Low Cycle Fatigue of Sc-Modified AA2519-T62 FSW Joint.Sc 改性 AA2519-T62 搅拌摩擦焊接接头的性能及低周疲劳研究
Materials (Basel). 2020 Nov 19;13(22):5226. doi: 10.3390/ma13225226.
9
Improving Mechanical Properties of PVPPA Welded Joints of 7075 Aluminum Alloy by PWHT.通过焊后热处理提高7075铝合金PVPPA焊接接头的力学性能。
Materials (Basel). 2018 Mar 5;11(3):379. doi: 10.3390/ma11030379.
10
Strain Analysis of Ti6Al4V Titanium Alloy Samples Using Digital Image Correlation.使用数字图像相关技术对Ti6Al4V钛合金样品进行应变分析。
Materials (Basel). 2020 Jul 31;13(15):3398. doi: 10.3390/ma13153398.

引用本文的文献

1
Mechanical Properties Analysis of Explosive Welded Sheet of AA2519-Ti6Al4V with Interlayer of AA1050 Subjected to Heat-Treatment.对带有AA1050中间层的AA2519-Ti6Al4V爆炸焊接板材进行热处理后的力学性能分析
Materials (Basel). 2022 Jun 6;15(11):4023. doi: 10.3390/ma15114023.
2
Structure Formation in Antifriction Composites with a Nickel Matrix and Its Effect on Properties.镍基减摩复合材料的组织形成及其对性能的影响。
Materials (Basel). 2022 May 9;15(9):3404. doi: 10.3390/ma15093404.
3
Selective Laser Melted M300 Maraging Steel-Material Behaviour during Ballistic Testing.

本文引用的文献

1
Comparison of Different Heat Treatment Processes of Selective Laser Melted 316L Steel Based on Analysis of Mechanical Properties.基于力学性能分析的选择性激光熔化316L钢不同热处理工艺比较
Materials (Basel). 2020 Aug 28;13(17):3805. doi: 10.3390/ma13173805.
2
Crack Growth Behavior of Additively Manufactured 316L Steel-Influence of Build Orientation and Heat Treatment.增材制造316L钢的裂纹扩展行为——构建方向和热处理的影响
Materials (Basel). 2020 Jul 22;13(15):3259. doi: 10.3390/ma13153259.
3
Influence of Selective Laser Melting Technological Parameters on the Mechanical Properties of Additively Manufactured Elements Using 316L Austenitic Steel.
选择性激光熔化的M300马氏体时效钢——弹道测试中的材料行为
Materials (Basel). 2021 May 20;14(10):2681. doi: 10.3390/ma14102681.
选择性激光熔化工艺参数对使用316L奥氏体钢增材制造零件力学性能的影响
Materials (Basel). 2020 Mar 22;13(6):1449. doi: 10.3390/ma13061449.
4
The Examination of Restrained Joints Created in the Process of Multi-Material FFF Additive Manufacturing Technology.多材料熔融沉积成型增材制造技术过程中产生的受限接头检测
Materials (Basel). 2020 Feb 18;13(4):903. doi: 10.3390/ma13040903.
5
Static and Dynamic Loading Behavior of Ti6Al4V Honeycomb Structures Manufactured by Laser Engineered Net Shaping (LENS) Technology.激光工程化净成形（LENS）技术制造的Ti6Al4V蜂窝结构的静态和动态加载行为
Materials (Basel). 2019 Apr 15;12(8):1225. doi: 10.3390/ma12081225.