Suppr超能文献

环状拉伸/压缩气-液界面生产丝纤维的简单方法。

Cyclic Expansion/Compression of the Air-Liquid Interface as a Simple Method to Produce Silk Fibers.

机构信息

Spiber Technologies AB, Stockholm, 114 28, Sweden.

Institute of Protein Science, School of Engineering Sciences in Chemistry, Biotechnology and Health, KTH Royal Institute of Technology, School of Biotechnology, Stockholm, SE-100 44, Sweden.

出版信息

Macromol Biosci. 2021 Jan;21(1):e2000227. doi: 10.1002/mabi.202000227. Epub 2020 Oct 4.

Abstract

Self-assembly of recombinant spider silk protein at air-liquid interfaces is used as a starting point to produce homogeneous fiber bundles. The film that is formed on a silk protein solution in a vertically placed syringe is subjected to repeated controlled extension and compression by an oscillating vertical motion. Thereby, a precise breakup of the film can be achieved, followed by transport and roll-up against the syringe wall prior to extraction. Advantages of the method are that it 1) is simple to use; 2) requires a small volume of protein solution (1 mL) at relatively low concentration (1 mg mL ); 3) can be performed under sterile conditions; 4) does not require any use of coagulants; and 5) is compatible with the addition of viable cells during the process, which thereby are integrated uniformly throughout the fiber.

摘要

利用重组蜘蛛丝蛋白在气液界面的自组装作为起点来制备均匀的纤维束。将溶液置于垂直放置的注射器中,在纤维形成过程中,通过振荡垂直运动对纤维膜进行反复的可控拉伸和压缩,从而可以精确地将纤维膜分裂,然后在提取之前将其输送并缠绕在注射器壁上。该方法的优点在于:1)操作简单;2)只需使用少量的蛋白质溶液(1 毫升),浓度相对较低(1 毫克/毫升);3)可在无菌条件下进行;4)不需要使用任何凝固剂;5)与添加活细胞兼容,从而可以将细胞均匀地整合到纤维中。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验