Suppr超能文献

使用TOPAS蒙特卡罗工具包生成瓦里安ProBeam质子治疗系统的束流模型。

Producing a Beam Model of the Varian ProBeam Proton Therapy System using TOPAS Monte Carlo Toolkit.

作者信息

Rahman Mahbubur, Bruza Petr, Lin Yuting, Gladstone David J, Pogue Brian W, Zhang Rongxiao

机构信息

Thayer School of Engineering, Dartmouth College, Hanover, NH, 03755, USA.

Department of Radiation Oncology, Winship Cancer Institute of Emory University, Atlanta, GA, 30322, USA.

出版信息

Med Phys. 2020 Dec;47(12):6500-6508. doi: 10.1002/mp.14532. Epub 2020 Nov 8.

Abstract

PURPOSE

A Geant4-based TOPAS Monte Carlo toolkit was utilized to model a Varian ProBeam proton therapy system, with the aim of providing an independent computational platform for validating advanced dosimetric methods.

MATERIALS AND METHODS

The model was tested for accuracy of dose and linear energy transfer (LET) prediction relative to the commissioning data, which included integral depth dose (IDD) in water and spot profiles in air measured at varying depths (for energies of 70 to 240 MeV in increments of 10 MeV, and 242 MeV), and absolute dose calibration. Emittance was defined based on depth-dependent spot profiles and Courant-Snyder's particle transport theory, which provided spot size and angular divergence along the inline and crossline plane. Energy spectra were defined as Gaussian distributions that best matched the range and maximum dose of the IDD. The validity of the model was assessed based on measurements of range, dose to peak difference, mean point to point difference, spot sizes at different depths, and spread-out Bragg peak (SOBP) IDD and was compared to the current treatment planning software (TPS).

RESULTS

Simulated and commissioned spot sizes agreed within 2.5%. The single spot IDD range, maximum dose, and mean point to point difference of each commissioned energy agreed with the simulated profiles generally within 0.07 mm, 0.4%, and 0.6%, respectively. A simulated SOBP plan agreed with the measured dose within 2% for the plateau region. The protons/MU and absolute dose agreed with the current TPS to within 1.6% and exhibited the greatest discrepancy at higher energies.

CONCLUSIONS

The TOPAS model agreed well with the commissioning data and included inline and crossline asymmetry of the beam profiles. The discrepancy between the measured and TOPAS-simulated SOBP plan may be due to beam modeling simplifications of the current TPS and the nuclear halo effect. The model can compute LET, and motivates future studies in understanding equivalent dose prediction in treatment planning, and investigating scintillation quenching.

摘要

目的

利用基于Geant4的TOPAS蒙特卡罗工具包对瓦里安ProBeam质子治疗系统进行建模,旨在提供一个独立的计算平台,以验证先进的剂量测定方法。

材料与方法

相对于调试数据测试了该模型在剂量和线性能量转移(LET)预测方面的准确性,调试数据包括水中的积分深度剂量(IDD)和在不同深度(能量为70至240 MeV,以10 MeV为增量,以及242 MeV)测量的空气中的束斑轮廓,以及绝对剂量校准。基于深度相关的束斑轮廓和柯朗 - Snyder粒子输运理论定义发射度,该理论提供了沿直线和交叉线平面的束斑尺寸和角发散。能谱被定义为与IDD的射程和最大剂量最匹配的高斯分布。基于射程、剂量峰值差、平均点对点差、不同深度处的束斑尺寸以及扩展布拉格峰(SOBP)IDD的测量结果评估模型的有效性,并与当前的治疗计划软件(TPS)进行比较。

结果

模拟和调试得到的束斑尺寸在2.5%以内相符。每个调试能量的单束斑IDD射程、最大剂量和平均点对点差与模拟轮廓通常分别在0.07 mm、0.4%和0.6%以内相符。模拟的SOBP计划在平台区域与测量剂量在2%以内相符。质子/监测单位(MU)和绝对剂量与当前TPS在1.6%以内相符,并且在较高能量时差异最大。

结论

TOPAS模型与调试数据吻合良好,并且包括了束流轮廓的直线和交叉线不对称性。测量的和TOPAS模拟的SOBP计划之间的差异可能是由于当前TPS的束流建模简化和核晕效应。该模型可以计算LET,并推动未来在理解治疗计划中等效剂量预测以及研究闪烁猝灭方面的研究。

相似文献

本文引用的文献

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验