Poly (deep eutectic solvents) as a new class of sustainable sorbents for solid phase extraction: application for preconcentration of Pb (II) from food and water samples.

A new class of polymeric sorbents based on deep eutectic solvents (DESs) is introduced. These materials are obtained from simple and inexpensive precursors via an energy-efficient process. The primary benefit of these sorbents is that they possess the unique characteristics of DESs and porous materials simultaneously. Moreover, the possibility of tailoring deep eutectic solvents allows designing a specific polymer for a desired analyte, based on its physical and chemical properties. In this work, the deep eutectic solvent of tetrabutylammonium bromide and acrylic acid (1:2 molar ratio) was prepared and then polymerized under solventless condition. The synthesized polymer was characterized by FT-IR spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), and Brunauer, Emmett and Teller analysis (BET) to evaluate the properties of the sorbent. The poly (TBAB-2AA DES) was applied as a selective sorbent for preconcentration of lead from food and water samples prior to its quantification by flame atomic absorption spectroscopy (FAAS). Variable factors affecting the extraction were optimized, and under the optimum conditions, the calibration plot was linear in the range 5.0-250.0 μg L. The relative standard deviation was (for n = 5) (RSD) < 3%. The limit of detection (LOD) and the enhancement factor were found to be 2.0 μg L and 50, respectively. Finally, the accuracy of the method was assessed by comparison of the results with those obtained by direct determination of lead using inductively coupled plasma mass spectrometry (ICP-MS) and spiked real samples. The obtained recoveries were between 92 and 106%. Graphical abstract.