Kang Y F, Shan X F, Zhang L, Cai Z G
Beijing Da Xue Xue Bao Yi Xue Ban. 2020 Oct 18;52(5):938-942. doi: 10.19723/j.issn.1671-167X.2020.05.024.
To investigate the position change of the fibular bone after maxillary reconstruction by free fibular flap and to analyze the factors affecting the position change.
Patients who underwent maxillary reconstruction by free fibular flap in the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from November 2012 to November 2016 were enrolled in this study. CT scans 1 week and 1 year postoperatively were collected and stored in DICOM format. The ProPlan CMF software was used to reconstruct the CT scans and separate the maxilla and each segment of the fibular flap. The Geomagic Control software was used to measure the long axis direction vector of each fibular segment. And the position change direction was recorded. The patients were divided into groups according to the use of the fibula or titanium plate to reconstruct the zygomaticmaxillary buttress.
A total of 32 patients were enrolled. Among them, 21 were in the titanium plate group and 11 in the fibula bone group. The angle between the long axis of the fibular segment and the axis in the - plane was 95.65°±53.49° and 95.53°±52.77°, 1 week and 1 year postoperatively, and there was no statistical difference (>0.05). The angle between the long axis of the fibular segment and the axis in the - plane was 96.88°±69.76° and 95.33°±67.42°, respectively, with statistical difference (=0.0497). The angular changes of the long axis of the fibular segment in the titanium plate group and the fibular bone group were 3.23°±3.93° and 1.94°±1.78°, respectively, and the angular changes in the - plane were 6.02°±9.89° and 3.27°±2.31°, respectively. There was no significant difference between the groups (>0.05). The long axis changes of the fibular segment in the - plane for reconstruction of the anterior alveolar, posterior alveolar, and buttress were 3.13°±3.78°, 2.56°±3.17°, and 5.51°±4.39°, respectively. There was a statistical difference ( = 0.023) between the posterior and buttress. In the - plane, theses were 4.94°±4.75°, 5.26°±10.25°, 6.69°±6.52°, respectively. There was no statistical difference among the three groups (>0.05). The main positional deviation directions of the titanium plate group and the fibular bone group were interior and superior sides, and there was no statistical difference between the two groups (>0.05).
One year postoperatively, the position of the free fibular flap was changed compared with 1 week postoperatively. The position of the free fibular flap was mainly changed to the interior and superior sides.
探讨游离腓骨瓣上颌骨重建术后腓骨位置变化情况,并分析影响位置变化的因素。
选取2012年11月至2016年11月在北京大学口腔医学院口腔颌面外科接受游离腓骨瓣上颌骨重建的患者。收集术后1周和1年的CT扫描图像,并以DICOM格式存储。使用ProPlan CMF软件重建CT扫描图像,分离上颌骨和腓骨瓣的各个节段。使用Geomagic Control软件测量各腓骨节段的长轴方向向量,并记录位置变化方向。根据是否使用腓骨或钛板重建颧上颌支柱将患者分组。
共纳入32例患者。其中,钛板组21例,腓骨组11例。术后1周和1年时,腓骨节段长轴与矢状面轴的夹角分别为95.65°±53.49°和95.53°±52.77°,差异无统计学意义(P>0.05)。腓骨节段长轴与冠状面轴的夹角分别为96.88°±69.76°和95.33°±67.42°,差异有统计学意义(P = 0.0497)。钛板组和腓骨组腓骨节段长轴的角度变化分别为3.23°±3.93°和1.94°±1.78°,冠状面的角度变化分别为6.02°±9.89°和3.27°±2.31°。两组间差异无统计学意义(P>0.05)。重建前牙槽、后牙槽和支柱时,腓骨节段在矢状面的长轴变化分别为3.13°±3.78°、2.56°±3.17°和5.51°±4.39°。后牙槽和支柱之间差异有统计学意义(P = 0.023)。在冠状面,分别为4.94°±4.75°、5.26°±10.25°、6.69°±6.52°。三组间差异无统计学意义(P>0.05)。钛板组和腓骨组的主要位置偏差方向为内侧和上方,两组间差异无统计学意义(P>0.05)。
术后1年时,游离腓骨瓣的位置与术后1周相比发生了变化。游离腓骨瓣的位置主要向内侧和上方改变。