Wear debris released by hip prosthesis analysed by microcomputed tomography.

Total hip arthroplasty uses commercial devices that combine different types of biomaterials. Among them, metals, ceramics and metal oxides can be used either in the prosthesis itself or in the cement used to anchor them in the bone. Over time, all of these materials can wear out and release particles that accumulate in the periprosthetic tissues or can migrate away. We used histology blocks from 15 patients (5 titanium metallosis, 5 alumina prostheses, 5 with altered methacrylic cement) to perform a microCT study and compare it with conventional histology data. An EDS-SEM analysis was done to characterise the atomic nature of the materials involved. A morphometric analysis was also performed in 3D to count the particles and assess their density and size. The metallic particles appeared to be the largest and the ceramic particles the finest. However, microCT could not reveal the wear particles of radiolucent biomaterials such as polyethylene and the very fine zirconia particles from cement fragmentation. MicroCT analysis can reveal the extent of the accumulation of these debris in the periprosthetic tissues. LAYOUT DESCRIPTION: Hip prostheses progressively degrade in the body by releasing wear debris. They accumulate in the periprosthetic tissues. Microcomputed tomography was used to image three types of radio-opaque wear debris: metal, ceramic and zirconia used in the bone cements.