在大鼠模型中,前交叉韧带重建的自体移植物的生物力学性能和肌腱骨整合优于混合移植物。
An Autograft for Anterior Cruciate Ligament Reconstruction Results in Better Biomechanical Performance and Tendon-Bone Incorporation Than Does a Hybrid Graft in a Rat Model.
机构信息
Department of Orthopaedic Surgery, Third Hospital of Hebei Medical University, Shijiazhuang, China.
Key Laboratory of Biomechanics of Hebei Province, Shijiazhuang, China.
出版信息
Am J Sports Med. 2020 Dec;48(14):3515-3524. doi: 10.1177/0363546520967668. Epub 2020 Nov 3.
BACKGROUND
The biomechanical and tendon-bone incorporation properties of allograft-augmented hybrid grafts for anterior cruciate ligament (ACL) reconstruction compared with traditional autografts are unknown.
HYPOTHESIS
Using an autograft for ACL reconstruction yields better results on biomechanical testing, radiographic analysis, and histological evaluation versus using a hybrid graft.
STUDY DESIGN
Controlled laboratory study.
METHODS
A total of 66 adult male Sprague Dawley rats underwent unilateral ACL reconstruction with an autograft (AT group; n = 33) or a hybrid graft (HB group; n = 33). The grafts used in both groups were harvested from the peroneus longus tendon and were fixed by suturing to the surrounding periosteum. Samples were harvested for biomechanical testing, micro-computed tomography (CT), and histological evaluation at 4, 8, and 12 weeks postoperatively. Bone tunnels on the femoral and tibial sides were divided into 3 subregions: intra-articular (IA), midtunnel (MT), and extra-articular (EA). A cylinder-like volume of interest in the bone tunnel and a tubular-like volume of interest around the bone tunnel were used to evaluate new bone formation and bone remodeling, respectively, via micro-CT.
RESULTS
In the AT group, there were significantly higher failure loads and stiffness at 8 weeks (failure load: 3.04 ± 0.40 vs 2.09 ± 0.54 N, respectively; = .006) (stiffness: 3.43 ± 0.56 vs 1.75 ± 0.52 N/mm, respectively; < .001) and 12 weeks (failure load: 9.10 ± 1.13 vs 7.14 ± 0.94 N, respectively; = .008) (stiffness: 4.45 ± 0.75 vs 3.36 ± 0.29 N/mm, respectively; = .008) than in the HB group. With regard to new bone formation in the bone tunnel, in the AT group, the bone volume/total volume (BV/TV) was significantly higher than in the HB group on the tibial side at 8 weeks (IA: 22.21 ± 4.98 vs 5.16 ± 3.98, respectively; < .001) (EA: 19.66 ± 7.19 vs 10.85 ± 2.16, respectively; = .030) and 12 weeks (IA: 30.50 ± 5.04 vs 17.11 ± 7.31, respectively; = .010) (MT: 21.15 ± 2.58 vs 15.55 ± 4.48, respectively; = .041) (EA: 20.75 ± 3.87 vs 10.64 ± 3.94, respectively; = .003). With regard to bone remodeling around the tunnel, the BV/TV was also significantly higher on the tibial side at 8 weeks (MT: 33.17 ± 8.05 vs 15.21 ± 7.60, respectively; = .007) (EA: 25.19 ± 6.38 vs 13.94 ± 7.10, respectively; = .030) and 12 weeks (IA: 69.46 ± 4.45 vs 47.80 ± 6.16, respectively; < .001) (MT: 33.15 ± 3.88 vs 13.76 ± 4.07, respectively; < .001) in the AT group than in the HB group. Sharpey-like fibers had formed at 8 weeks in the AT group. A large number of fibroblasts withdrew at 12 weeks. In the AT group, the width of the interface was significantly narrower at 4 weeks (85.86 ± 17.49 vs 182.97 ± 14.35 μm, respectively; < .001), 8 weeks (58.86 ± 10.99 vs 90.15 ± 11.53 μm, respectively; = .002), and 12 weeks (42.70 ± 7.96 vs 67.29 ± 6.55 μm, respectively; = .001) than in the HB group.
CONCLUSION
Using an autograft for ACL reconstruction may result in improved biomechanical properties and tendon-bone incorporation compared with a hybrid graft.
CLINICAL RELEVANCE
Augmenting small autografts with allograft tissue may result in decreased biomechanical performance and worse tendon-bone incorporation, increasing the risk of graft failure.
背景
与传统自体移植物相比,用于前交叉韧带(ACL)重建的同种异体增强混合移植物的生物力学和肌腱-骨整合特性尚不清楚。
假设
与使用混合移植物相比,使用 ACL 重建的自体移植物在生物力学测试、放射学分析和组织学评估方面产生更好的结果。
研究设计
对照实验室研究。
方法
66 只成年雄性 Sprague Dawley 大鼠接受单侧 ACL 重建,使用自体移植物(AT 组;n = 33)或混合移植物(HB 组;n = 33)。两组移植物均取自腓骨长肌腱,并通过缝合固定在周围骨膜上。术后 4、8 和 12 周分别采集样本进行生物力学测试、微计算机断层扫描(micro-CT)和组织学评估。股骨和胫骨侧的骨隧道分为 3 个亚区:关节内(IA)、中隧道(MT)和关节外(EA)。在骨隧道内使用圆柱形感兴趣体积,在骨隧道周围使用管状感兴趣体积,分别通过 micro-CT 评估新骨形成和骨重塑。
结果
在 AT 组中,8 周时(失效载荷:3.04 ± 0.40 比 2.09 ± 0.54 N, =.006)(刚度:3.43 ± 0.56 比 1.75 ± 0.52 N/mm, <.001)和 12 周时(失效载荷:9.10 ± 1.13 比 7.14 ± 0.94 N, =.008)(刚度:4.45 ± 0.75 比 3.36 ± 0.29 N/mm, =.008)的失效负荷和刚度均明显高于 HB 组。在骨隧道内新骨形成方面,AT 组胫骨侧的骨体积/总体积(BV/TV)在 8 周时明显高于 HB 组(IA:22.21 ± 4.98 比 5.16 ± 3.98, <.001)(EA:19.66 ± 7.19 比 10.85 ± 2.16, =.030)和 12 周时(IA:30.50 ± 5.04 比 17.11 ± 7.31, =.010)(MT:21.15 ± 2.58 比 15.55 ± 4.48, =.041)(EA:20.75 ± 3.87 比 10.64 ± 3.94, =.003)。在隧道周围的骨重塑方面,8 周时(MT:33.17 ± 8.05 比 15.21 ± 7.60, =.007)(EA:25.19 ± 6.38 比 13.94 ± 7.10, =.030)和 12 周时(IA:69.46 ± 4.45 比 47.80 ± 6.16, <.001)(MT:33.15 ± 3.88 比 13.76 ± 4.07, <.001)的胫骨侧的 BV/TV 也明显高于 HB 组。8 周时,AT 组形成了沙氏样纤维。12 周时,大量成纤维细胞退缩。在 AT 组中,4 周时(85.86 ± 17.49 比 182.97 ± 14.35 μm, <.001)、8 周时(58.86 ± 10.99 比 90.15 ± 11.53 μm, =.002)和 12 周时(42.70 ± 7.96 比 67.29 ± 6.55 μm, =.001)的界面宽度明显小于 HB 组。
结论
与混合移植物相比,使用 ACL 重建的自体移植物可能具有改善的生物力学特性和肌腱-骨整合。
临床相关性
用同种异体组织增强小的自体移植物可能会导致生物力学性能下降和肌腱-骨整合不良,增加移植物失败的风险。