掺入银纳米颗粒的丙烯酸光固化树脂托盘的评估
Evaluation of Silver Nanoparticles Incorporated Acrylic Light Cure Resin Trays.
作者信息
Alhawiatan Ali S, Alqutaym Omar S, Aldawsari Saad N, Zuhair Faisal A, Alqahtani Refdan O, Alshehri Turki H
机构信息
College of Dentistry, Prince Sattam Bin Abdulaziz University, Al-Kharj, Kingdom of Saudi Arabia.
出版信息
J Pharm Bioallied Sci. 2020 Aug;12(Suppl 1):S173-S175. doi: 10.4103/jpbs.JPBS_52_20. Epub 2020 Aug 28.
Abstract
UNLABELLED
The conventional denture base resins had many drawbacks. Hence, the objective of this study was to compare the effect of incorporation of silver nanoparticles on mechanical properties of light-cured resin material.
MATERIALS AND METHODS
Specimens of acrylic resin (control group) and acrylic resin reinforced with 2% silver nanoparticles (test group) were evaluated for mechanical properties such as impact strength, transverse strength, modulus of elasticity, and deflection. Unpaired test was used for statistical analysis.
RESULTS
Mechanical properties of light cure reinforced with silver nanoparticles were significantly higher than conventional light-cured resin ( < 0.05).
CONCLUSION
The incorporation of silver nanoparticles into light-cured resin increases the mechanical properties making it more stronger material.
摘要
未标注
传统义齿基托树脂有许多缺点。因此，本研究的目的是比较掺入银纳米颗粒对光固化树脂材料力学性能的影响。
材料与方法
对丙烯酸树脂（对照组）和添加2%银纳米颗粒的丙烯酸树脂（试验组）的试样进行冲击强度、横向强度、弹性模量和挠度等力学性能评估。采用非配对检验进行统计分析。
结果
添加银纳米颗粒的光固化材料的力学性能显著高于传统光固化树脂（P<0.05）。
结论
在光固化树脂中掺入银纳米颗粒可提高力学性能，使其成为更强的材料。
相似文献
1
Evaluation of Silver Nanoparticles Incorporated Acrylic Light Cure Resin Trays.掺入银纳米颗粒的丙烯酸光固化树脂托盘的评估
J Pharm Bioallied Sci. 2020 Aug;12(Suppl 1):S173-S175. doi: 10.4103/jpbs.JPBS_52_20. Epub 2020 Aug 28.
2
Effect of silver nanoparticles incorporation on viscoelastic properties of acrylic resin denture base material.银纳米颗粒掺入对丙烯酸树脂义齿基托材料粘弹性性能的影响。
Eur J Dent. 2015 Apr-Jun;9(2):207-212. doi: 10.4103/1305-7456.156821.
3
4
Evaluation of Impact Strength of Dental Acrylic Resins by Incorporation of TiO Nanoparticles Using Two Different Processing Techniques.使用两种不同加工技术通过掺入二氧化钛纳米颗粒评估牙科丙烯酸树脂的冲击强度。
J Contemp Dent Pract. 2019 Oct 1;20(10):1184-1189.
5
Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin.五种编织纤维增强材料对义齿基托树脂冲击强度和横向强度的影响。
J Prosthet Dent. 1999 May;81(5):616-20. doi: 10.1016/s0022-3913(99)70218-0.
6
The Effect of Different levels of a Network Reinforced System and Curing Methods on Properties of Different Acrylic Resin Denture Base Materials.不同水平的网状增强系统和固化方法对不同丙烯酸树脂义齿基托材料性能的影响。
J Int Soc Prev Community Dent. 2022 Dec 30;12(6):621-629. doi: 10.4103/jispcd.JISPCD_187_22. eCollection 2022 Nov-Dec.
7
The effect of fiber reinforcement type and water storage on strength properties of a provisional fixed partial denture resin.纤维增强类型和水储存对临时固定局部义齿树脂强度性能的影响。
J Biomater Appl. 2003 Apr;17(4):277-86. doi: 10.1177/0885328203017004003.
8
The Effect of Surface Treatments on the Shear Bond Strength of Acrylic Resin Denture Base With Different Repair Acrylic Resin: An Study.表面处理对不同修复用丙烯酸树脂的丙烯酸树脂义齿基托剪切粘结强度的影响：一项研究。
J Pharm Bioallied Sci. 2019 May;11(Suppl 2):S380-S384. doi: 10.4103/JPBS.JPBS_40_19.
9
An evaluation of self-cured and visible light-cured denture base materials when used as a denture base repair material.自凝和可见光固化义齿基托材料用作义齿基托修复材料的评估。
J Oral Rehabil. 1997 Oct;24(10):755-60. doi: 10.1046/j.1365-2842.1997.00571.x.
10
Flexural strength of modified and unmodified acrylic denture base material after different processing techniques.不同加工技术处理后改性和未改性丙烯酸义齿基托材料的挠曲强度。
J Ayub Med Coll Abbottabad. 2020 Oct-Dec;32(Suppl 1)(4):S672-S677.
引用本文的文献
1
Silver Nanoparticles (AgNPs) Incorporation into Polymethyl Methacrylate (PMMA) for Dental Appliance Fabrication: A Systematic Review and Meta-Analysis of Mechanical Properties.用于牙科器械制造的聚甲基丙烯酸甲酯（PMMA）中掺入银纳米颗粒（AgNPs）：机械性能的系统评价和荟萃分析
Int J Mol Sci. 2024 Nov 25;25(23):12645. doi: 10.3390/ijms252312645.
2
A Study on the Application Performance of High-Aspect-Ratio Nano-Ettringite in Photocurable Resin Composites.高长径比纳米钙矾石在光固化树脂复合材料中的应用性能研究
Materials (Basel). 2024 Jul 14;17(14):3492. doi: 10.3390/ma17143492.
3
Mapping the research landscape of nanoparticles and their use in denture base resins: a bibliometric analysis.绘制纳米颗粒及其在义齿基托树脂中的应用研究全景：一项文献计量分析。
Discov Nano. 2024 May 30;19(1):95. doi: 10.1186/s11671-024-04037-1.
4
Effect of silver nanoparticles on wettability, anti-fungal effect, flexural strength, and color stability of injection-molded heat-cured polymethylmethacrylate in human saliva.纳米银颗粒对人唾液中注塑热固化聚甲基丙烯酸甲酯润湿性、抗真菌效果、弯曲强度和颜色稳定性的影响。
J Indian Prosthodont Soc. 2022 Oct-Dec;22(4):368-376. doi: 10.4103/jips.jips_574_21.
本文引用的文献
1
Shear bond strength of denture teeth to heat- and light-polymerized denture base resin.义齿牙对热固型和光固型义齿基托树脂的抗剪粘接强度。
J Prosthodont. 2011 Jan;20(1):52-9. doi: 10.1111/j.1532-849X.2010.00639.x. Epub 2010 Nov 11.
2
Hardness, flexural strength, and flexural modulus comparisons of three differently cured denture base systems.三种不同固化方式的义齿基托材料的硬度、弯曲强度和弯曲模量比较
J Prosthodont. 2008 Oct;17(7):545-9. doi: 10.1111/j.1532-849X.2008.00357.x. Epub 2008 Aug 26.
3
Comparative study of the transverse strength of three denture base materials.三种义齿基托材料横向强度的比较研究
J Dent. 2007 Dec;35(12):930-3. doi: 10.1016/j.jdent.2007.09.006. Epub 2007 Oct 17.
4
Physical properties of four acrylic denture base resins.四种丙烯酸类义齿基托树脂的物理性能
J Contemp Dent Pract. 2005 Nov 15;6(4):93-100.
5
Flexible denture flanges for patients exhibiting undercut tuberosities and reduced width of the buccal vestibule: a clinical report.适用于存在结节倒凹和颊侧前庭沟宽度减小患者的柔性义齿基托：临床报告
J Prosthet Dent. 2004 Aug;92(2):128-31. doi: 10.1016/j.prosdent.2004.04.026.
6
Cytotoxicity of denture base resins: effect of water bath and microwave postpolymerization heat treatments.义齿基托树脂的细胞毒性：水浴和微波后聚合热处理的影响
Int J Prosthodont. 2004 May-Jun;17(3):340-4.
7
An investigation into the transverse and impact strength of "high strength" denture base acrylic resins.“高强度”义齿基托丙烯酸树脂的横向及抗冲击强度调查。
J Oral Rehabil. 2002 Mar;29(3):263-7. doi: 10.1046/j.1365-2842.2002.00830.x.
8
Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers.用玻璃、芳纶或尼龙纤维增强的热聚合聚甲基丙烯酸甲酯义齿树脂的弯曲强度。
J Prosthet Dent. 2001 Oct;86(4):424-7. doi: 10.1067/mpr.2001.118564.
9
Some mechanical properties of a highly cross-linked, microwave-polymerized, injection-molded denture base polymer.一种高度交联、微波聚合、注塑成型义齿基托聚合物的一些力学性能。
Int J Prosthodont. 2001 May-Jun;14(3):214-8.
10
The reinforcement of dentures.义齿的加固
J Oral Rehabil. 1999 Mar;26(3):185-94. doi: 10.1046/j.1365-2842.1999.00375.x.
Zotero 插件