Chiou Gennifer, Jui Elysa, Rhea Allison C, Gorthi Aparna, Miar Solaleh, Acosta Francisca M, Perez Cynthia, Suhail Yasir, Chen Yidong, Ong Joo L, Bizios Rena, Rathbone Christopher, Guda Teja
Department of Biomedical Engineering and Chemical Engineering, University of Texas at San Antonio, San Antonio, TX 78249 USA.
Greehey Children's Cancer Research Institute, University of Texas Health at San Antonio, San Antonio, TX 78229 USA.
Cell Mol Bioeng. 2020 Aug 18;13(5):507-526. doi: 10.1007/s12195-020-00648-7. eCollection 2020 Oct.
Volumetric tissue-engineered constructs are limited in development due to the dependence on well-formed vascular networks. Scaffold pore size and the mechanical properties of the matrix dictates cell attachment, proliferation and successive tissue morphogenesis. We hypothesize scaffold pore architecture also controls stromal-vessel interactions during morphogenesis.
The interaction between mesenchymal stem cells (MSCs) seeded on hydroxyapatite scaffolds of 450, 340, and 250 μm pores and microvascular fragments (MVFs) seeded within 20 mg/mL fibrin hydrogels that were cast into the cell-seeded scaffolds, was assessed over 21 days and compared to the fibrin hydrogels without scaffold but containing both MSCs and MVFs. mRNA sequencing was performed across all groups and a computational mechanics model was developed to validate architecture effects on predicting vascularization driven by stiffer matrix behavior at scaffold surfaces compared to the pore interior.
Lectin staining of decalcified scaffolds showed continued vessel growth, branching and network formation at 14 days. The fibrin gel provides no resistance to spread-out capillary networks formation, with greater vessel loops within the 450 μm pores and vessels bridging across 250 μm pores. Vessel growth in the scaffolds was observed to be stimulated by hypoxia and successive angiogenic signaling. Fibrin gels showed linear fold increase in VEGF expression and no change in BMP2. Within scaffolds, there was multiple fold increase in VEGF between days 7 and 14 and early multiple fold increases in BMP2 between days 3 and 7, relative to fibrin. There was evidence of yap/taz based hippo signaling and mechanotransduction in the scaffold groups. The vessel growth models determined by computational modeling matched the trends observed experimentally.
The differing nature of hypoxia signaling between scaffold systems and mechano-transduction sensing matrix mechanics were primarily responsible for differences in osteogenic cell and microvessel growth. The computational model implicated scaffold architecture in dictating branching morphology and strain in the hydrogel within pores in dictating vessel lengths.
由于依赖完善的血管网络,体积性组织工程构建体的发展受到限制。支架孔径和基质的力学性能决定细胞附着、增殖及后续组织形态发生。我们推测支架孔结构在形态发生过程中也控制基质 - 血管相互作用。
评估接种于孔径为450、340和250μm的羟基磷灰石支架上的间充质干细胞(MSC)与接种于20mg/mL纤维蛋白水凝胶中并注入细胞接种支架内的微血管片段(MVF)之间在21天内的相互作用,并与不含支架但含有MSC和MVF的纤维蛋白水凝胶进行比较。对所有组进行mRNA测序,并开发计算力学模型以验证与孔内部相比,支架表面更硬基质行为对预测血管生成的结构效应。
脱钙支架的凝集素染色显示在14天时血管持续生长、分支和网络形成。纤维蛋白凝胶对散开的毛细血管网络形成无阻力,在450μm孔径内有更多血管环,且血管跨越250μm孔径。观察到支架中的血管生长受缺氧和后续血管生成信号刺激。纤维蛋白凝胶显示VEGF表达呈线性倍数增加,BMP2无变化。在支架内,相对于纤维蛋白,第7天至14天VEGF增加数倍,第3天至7天BMP2早期增加数倍。在支架组中有基于yap/taz的河马信号传导和机械转导的证据。通过计算建模确定的血管生长模型与实验观察到的趋势相符。
支架系统之间缺氧信号传导的不同性质以及机械转导感知基质力学主要是成骨细胞和微血管生长差异的原因。计算模型表明支架结构决定分支形态,孔内水凝胶中的应变决定血管长度。