Suppr超能文献

端到端剂量学审核:为爱尔兰高剂量率近距离放射治疗中心开发的一种新程序。

End-to-end dosimetric audit: A novel procedure developed for Irish HDR brachytherapy centres.

作者信息

Bassi Sarah, Berrigan Leanne, Zuchora Anysja, Fahy Louise, Moore Margaret

机构信息

Azienda Sanitaria Universitaria Friuli Centrale, Udine, Italy.

Galway University Hospitals, Medical Physics and Bioengineering, Galway, Ireland.

出版信息

Phys Med. 2020 Dec;80:221-229. doi: 10.1016/j.ejmp.2020.10.005. Epub 2020 Nov 13.

Abstract

PURPOSE

A dosimetric audit of Ir-192 high dose rate (HDR) brachytherapy remote after-loading units was carried out in 2019. All six brachytherapy departments on the island of Ireland participated in an end-to-end test and in a review of local HDR dosimetry procedures.

MATERIALS AND METHODS

A 3D-printed customised phantom was created to position the following detectors at known distances from the HDR source: a Farmer ionization chamber, GafChromic film and thermoluminescent dosimeters (TLDs). Dedicated HDR applicator needles were used to position an Ir-192 source at 2 cm distance from these detectors. The end-to-end dosimetry audit pathway was performed at each host site and included the stages of imaging, applicator reconstruction, treatment planning and delivery. Deviations between planned and measured dose distributions were quantified using gamma analysis methods. Local procedures were also discussed between auditors and hosts.

RESULTS

The mean difference between Reference Air Kerma Rate (RAKR) measured during the audit and RAKR specified by the vendor source certificate was 1.3%. The results of end-to-end tests showed a mean difference between calculated and measured dose of 2.5% with TLDs and less than 0.5% with Farmer chamber measurements. GafChromic films showed a mean gamma passing rates of >95% for plastic and metal applicators with 2%/1 mm global tolerance criteria.

CONCLUSIONS

The results of this audit indicate dosimetric consistency between centres. The 'end to end' dosimetry audit methodology for HDR brachytherapy has been successfully implemented in a multicentre environment, which included different models of Ir-192 sources and different treatment planning systems. The ability to create a 3D-printed water-equivalent phantom customised to accurately position all three detector types simultaneously at controlled distances from the Ir-192 source under evaluation gives good reproducibility for end-to-end methodology.

摘要

目的

2019年对铱-192高剂量率(HDR)近距离后装治疗远程施源器进行了剂量学审核。爱尔兰岛上的所有六个近距离治疗科室都参与了端到端测试以及当地HDR剂量学程序的审查。

材料与方法

制作了一个3D打印的定制模体,以便将以下探测器放置在距HDR源已知距离处:一个 Farmer 电离室、GafChromic 胶片和热释光剂量计(TLD)。使用专用的HDR施源针将铱-192源放置在距这些探测器2厘米处。在每个主机站点执行端到端剂量学审核流程,包括成像、施源器重建、治疗计划和施源阶段。使用伽马分析方法对计划剂量分布与测量剂量分布之间的偏差进行量化。审核人员和主机站点之间还讨论了当地程序。

结果

审核期间测量的参考空气比释动能率(RAKR)与供应商源证书规定的RAKR之间的平均差异为1.3%。端到端测试结果显示,TLD测量的计算剂量与测量剂量之间的平均差异为 2.5%,而使用Farmer电离室测量时该差异小于0.5%。对于塑料和金属施源器,在2%/1毫米的全局公差标准下,GafChromic胶片的平均伽马通过率>95%。

结论

本次审核结果表明各中心之间在剂量学上具有一致性。HDR近距离治疗的“端到端”剂量学审核方法已在多中心环境中成功实施,该环境包括不同型号的铱-192源和不同的治疗计划系统。能够创建一个3D打印的水等效模体,定制该模体可将所有三种探测器类型同时精确放置在距正在评估的铱-192源的受控距离处,这为端到端方法提供了良好的可重复性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验