Krasnoukhov Vladislav S, Zagidullin Marsel V, Zavershinskiy Igor P, Mebel Alexander M
Samara National Research University, Samara 443086, Russian Federation.
Lebedev Physical Institute, Samara 443011, Russian Federation.
J Phys Chem A. 2020 Dec 3;124(48):9933-9941. doi: 10.1021/acs.jpca.0c09091. Epub 2020 Nov 18.
This work presents quantum chemical G3(MP2,CC)//B2PLYPD3/6-311G(d,p) calculations of the potential energy surface for the indenyl (CH) + cyclopentadienyl (CH) reaction followed by unimolecular decomposition of the CH radicals formed as the primary products, as well as the Rice-Ramsperger-Kassel-Marcus master equation (RRKM-ME) calculations to predict temperature- and pressure-dependent reaction rate constants and product branching ratios. The reaction begins with the barrierless recombination of indenyl and cyclopentadienyl forming a CH molecule with a new C-C bond connecting two five-membered rings, which subsequently dissociates to CH radicals by H losses. The primary products of the CH + CH → CH + H reaction can directly decompose by another H loss to benzofulvalene, and this pathway is most favorable in terms of the entropy factor and hence is preferable at higher temperatures. Otherwise, the initial CH isomers can undergo significant structural rearrangements before eliminating an H atom and producing phenanthrene, anthracene, or benzoazulenes, among which the formation of phenanthrene via the "spiran" pathway is clearly preferred. The calculated barriers along the computed favorable dissociation pathways are relatively low, in the ∼30-40 kcal/mol range, making the CH radicals unstable at temperatures above 1000-1250 K at 1 atm. The results of RRKM-ME calculations show that, under typical combustion conditions, the decomposition of the CH radicals predominantly leads to benzofulvalene. However, the latter can be rapidly converted to phenanthrene via H-assisted isomerization with the rate constant for the benzofulvalene + H → phenanthrene + H reaction being close to 10 cm molecule s at 1000-1500 K and 1 atm. The results provide further support for the hypothesis that recombination of two π radicals containing five-membered rings can lead to a growth of PAH with the formation of two fused six-membered rings, but the reaction mechanism may not be direct and is likely to involve two consecutive H atom losses leading to a fulvalene-like product, with subsequent H-assisted isomerization of the latter to a benzenoid PAH.
这项工作展示了对茚基(CH)+环戊二烯基(CH)反应势能面的量子化学G3(MP2,CC)//B2PLYPD3/6 - 311G(d,p)计算,该反应之后是作为主要产物形成的CH自由基的单分子分解,以及采用赖斯 - 拉姆齐 - 卡塞尔 - 马库斯主方程(RRKM - ME)计算来预测与温度和压力相关的反应速率常数及产物分支比。反应始于茚基和环戊二烯基的无障碍重组,形成一个带有连接两个五元环的新C - C键的CH分子,随后该分子通过氢损失分解为CH自由基。CH + CH → CH + H反应的主要产物可通过再一次氢损失直接分解为苯并富瓦烯,并且就熵因素而言,此途径最为有利,因此在较高温度下更占优势。否则,初始的CH异构体在消除一个氢原子并生成菲、蒽或苯并薁之前会经历显著的结构重排,其中通过“螺环”途径形成菲显然是更受青睐的。沿着计算出的有利解离途径计算出的势垒相对较低,在约30 - 40千卡/摩尔范围内,这使得CH自由基在1个大气压下温度高于1000 - 1250 K时不稳定。RRKM - ME计算结果表明,在典型的燃烧条件下,CH自由基的分解主要生成苯并富瓦烯。然而,后者可通过氢辅助异构化迅速转化为菲,在1000 - 1500 K和1个大气压下,苯并富瓦烯 + H → 菲 + H反应的速率常数接近10厘米³分子⁻¹秒⁻¹。这些结果为以下假设提供了进一步支持:两个含五元环的π自由基的重组可导致多环芳烃的增长,并形成两个稠合的六元环,但反应机制可能并非直接的,且可能涉及两个连续的氢原子损失,从而生成类似富瓦烯的产物,随后该产物通过氢辅助异构化为苯型多环芳烃。