Reply to Scott et al., "Safety concerns for facial topography customized 3D-printed N95 filtering face-piece respirator produced for the COVID-19 pandemic: initial step is respiratory fit testing".
作者信息
Haers P E, Swennen G R J
机构信息
South Thames Cleft Service, Evelina London Children's Hospital, London, UK.
Division of Maxillofacial Surgery, Department of Surgery, AZ Sint-Jan Brugge-Oostende AV, Bruges, Belgium.
出版信息
Int J Oral Maxillofac Surg. 2020 Dec;49(12):1661. doi: 10.1016/j.ijom.2020.08.016. Epub 2020 Sep 14.
Abstract
摘要
相似文献
1
Reply to Scott et al., "Safety concerns for facial topography customized 3D-printed N95 filtering face-piece respirator produced for the COVID-19 pandemic: initial step is respiratory fit testing".对斯科特等人所著《为应对新冠疫情生产的面部地形定制3D打印N95过滤式面罩呼吸器的安全问题：第一步是呼吸适配性测试》的回复
Int J Oral Maxillofac Surg. 2020 Dec;49(12):1661. doi: 10.1016/j.ijom.2020.08.016. Epub 2020 Sep 14.
2
Safety concerns for facial topography customized 3D-printed N95 filtering face-piece respirator produced for the COVID-19 pandemic: initial step is respiratory fit testing.针对为应对新冠疫情生产的面部形貌定制3D打印N95过滤式面罩呼吸器的安全问题：首要步骤是进行呼吸适合性测试。
Int J Oral Maxillofac Surg. 2020 Dec;49(12):1660-1661. doi: 10.1016/j.ijom.2020.08.017. Epub 2020 Sep 14.
3
Quantitative Fit Tested N95 Respirator-Alternatives Generated With CT Imaging and 3D Printing: A Response to Potential Shortages During the COVID-19 Pandemic.基于 CT 成像和 3D 打印技术制作的定量 Fit 测试 N95 型口罩替代品：应对 COVID-19 大流行期间潜在短缺的对策。
Acad Radiol. 2021 Feb;28(2):158-165. doi: 10.1016/j.acra.2020.11.005. Epub 2020 Nov 21.
4
Subject validation of reusable N95 stop-gap filtering facepiece respirators in COVID-19 pandemic.在 COVID-19 大流行期间可重复使用的 N95 临时过滤式面罩呼吸器的适用性验证。
PLoS One. 2020 Nov 13;15(11):e0242304. doi: 10.1371/journal.pone.0242304. eCollection 2020.
5
Adapting re-usable elastomeric respirators to utilise anaesthesia circuit filters using a 3D-printed adaptor - a potential alternative to address N95 shortages during the COVID-19 pandemic.用 3D 打印的转接器改造可重复使用的弹性口罩以利用麻醉回路过滤器——在 COVID-19 大流行期间解决 N95 短缺问题的一种潜在替代方案。
Anaesthesia. 2020 Aug;75(8):1022-1027. doi: 10.1111/anae.15108. Epub 2020 May 26.
6
7
High-Risk Aerosol-Generating Procedures in COVID-19: Respiratory Protective Equipment Considerations.COVID-19 中的高风险气溶胶生成操作：呼吸防护设备注意事项。
Otolaryngol Head Neck Surg. 2020 Jul;163(1):98-103. doi: 10.1177/0194599820927335. Epub 2020 May 12.
8
Three-dimensional printing in a pandemic: panacea or panic?疫情下的3D打印：万灵药还是恐慌之举？
Med J Aust. 2020 Sep;213(6):267-268. doi: 10.5694/mja2.50753.
9
Injection Molded Autoclavable, Scalable, Conformable (iMASC) system for aerosol-based protection: a prospective single-arm feasibility study.注塑式可高压灭菌、可扩展、可顺应(iMASC)的气溶胶防护系统：一项前瞻性单臂可行性研究。
BMJ Open. 2020 Jul 7;10(7):e039120. doi: 10.1136/bmjopen-2020-039120.
10
Autoclave sterilization and ethanol treatment of re-used surgical masks and N95 respirators during COVID-19: impact on their performance and integrity.在 COVID-19 期间，对重复使用的手术口罩和 N95 呼吸器进行高压灭菌和乙醇处理：对其性能和完整性的影响。
J Hosp Infect. 2020 Aug;105(4):608-614. doi: 10.1016/j.jhin.2020.06.030. Epub 2020 Jun 27.
本文引用的文献
1
Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks.定制的 3D 打印口罩，以防在缺乏市售 FFP2/3 口罩的大流行危机情况下使用。
Int J Oral Maxillofac Surg. 2020 May;49(5):673-677. doi: 10.1016/j.ijom.2020.03.015. Epub 2020 Apr 2.
Zotero 插件