Experimental Study of Mechanical Properties of Epoxy Compounds Modified with Calcium Carbonate and Carbon after Hygrothermal Exposure.

The objective of this paper is to analyze the effects of hygrothermal exposure on the mechanical properties of epoxy compounds modified with calcium carbonate or carbon fillers. In addition, comparative tests were carried out with the same parameters as hygrothermal exposure, but the epoxy compounds were additionally exposed to thermal shocks. The analysis used cylindrical specimens produced from two different epoxy compounds. The specimens were fabricated from compounds of epoxy resins, based on Bisphenol A (one mixture modified, one unmodified) and a polyamide curing agent. Some of the epoxy compounds were modified with calcium carbonate (CaCO). The remainder were modified with activated carbon (C). Each modifying agent, or filler, was added at a rate of 1 g, 2 g, or 3 g per 100 g of epoxy resin. The effect of the hygrothermal exposure (82 °C temperature and 95% RH humidity) was examined. The effects of thermal shocks, achieved by cycling between 82 °C and -40 °C, on selected mechanical properties of the filler-modified epoxy compounds were investigated. Strength tests were carried out on the cured epoxy compound specimens to determine the shear strength, compression modulus, and compressive strain. The analysis of the results led to the conclusion that the type of tested epoxy compounds and the quantity and type of filler determine the effects of climate chamber aging and thermal shock chamber processing on the compressive strength for the tested epoxy compounds. The different filler quantities, 1-3 g of calcium carbonate (CaCO) or activated carbon (C), determined the strength parameters, with results varying from the reference compounds and the compounds exposure in the climate chamber and thermal shock chamber. The epoxy compounds which contained unmodified epoxy resin achieved a higher strength performance than the epoxy compounds made with modified epoxy resin. In most instances, the epoxy compounds modified with CaCO had a higher compressive strength than the epoxy compounds modified with C (activated carbon).