Hirakawa Yuya, Ueda Hiroshi, Takata Yusuke, Minamihata Kosuke, Wakabayashi Rie, Kamiya Noriho, Goto Masahiro
Biologics, Laboratory for Advanced Medicine Research, Shionogi & Co., Ltd., 3-1-1, Futaba-cho, Toyonaka-shi, Osaka, 561-0825, Japan; Department of Applied Chemistry, Graduate School of Engineering, Kyushu University, Motooka 744, Nishi-ku, Fukuoka 819-0395, Japan.
Physical Chemistry, Laboratory for Medicinal Chemistry Research, Shionogi & Co., Ltd., 3-1-1, Futaba-cho, Toyonaka-shi, Osaka, 561-0825, Japan.
Eur J Pharm Sci. 2021 Mar 1;158:105667. doi: 10.1016/j.ejps.2020.105667. Epub 2020 Dec 6.
The objective of this study was to prepare a co-amorphous formulation of piroxicam (PIR), a non-steroidal anti-inflammatory drug, and citric acid (CA), and evaluate its skin permeation ability. A spray-drying method was employed to prepare the co-amorphous formulation and its physical properties were characterized. X-ray powder diffraction and thermal analysis confirmed a homogeneous amorphous state, and the infrared spectra revealed intermolecular interactions between PIR and CA, suggesting formation of a co-amorphous formulation of PIR and CA. The PIR-CA co-amorphous formulation exhibited no crystallization for 60 days at 4/25/40°C with silica gel. The PIR-CA co-amorphous formulation increased the solubility of PIR in polyethylene glycol 400 compared with that of the pure drug, and physical mixture (PM) of PIR and CA, confirming a supersaturated state in the formulation. The PIR-CA co-amorphous formulation demonstrated higher skin permeation than PIR alone or PM of PIR and CA, and the flux value was consistent with the degree of saturation. Thus, the increase in the skin permeation of PIR from the PIR-CA co-amorphous formulation directly depended on the increased thermodynamic activity by supersaturation in the absence of interactions between the drug and co-former in the vehicle.
本研究的目的是制备非甾体抗炎药吡罗昔康(PIR)与柠檬酸(CA)的共无定形制剂,并评估其皮肤渗透能力。采用喷雾干燥法制备共无定形制剂,并对其物理性质进行表征。X射线粉末衍射和热分析证实为均匀的无定形状态,红外光谱显示PIR与CA之间存在分子间相互作用,表明形成了PIR与CA的共无定形制剂。PIR-CA共无定形制剂在4/25/40°C下与硅胶共存60天未出现结晶现象。与纯药物以及PIR和CA的物理混合物(PM)相比,PIR-CA共无定形制剂提高了PIR在聚乙二醇400中的溶解度,证实制剂处于过饱和状态。PIR-CA共无定形制剂的皮肤渗透率高于单独的PIR或PIR与CA的PM,通量值与饱和程度一致。因此,PIR-CA共无定形制剂中PIR皮肤渗透率的提高直接取决于在载体中药物与共形成剂之间不存在相互作用时过饱和导致的热力学活性增加。