Laboratory of Functional Materials, Institute of Chemistry, University of Campinas - UNICAMP, P.O. Box 6154, 13083-970, Campinas, SP, Brazil.
Spectrometry Sample Preparation and Mechanization Group, Institute of Chemistry, University of Campinas - UNICAMP, P.O. Box 6154, 13083-970, Campinas, SP, Brazil.
Talanta. 2021 Mar 1;224:121808. doi: 10.1016/j.talanta.2020.121808. Epub 2020 Oct 28.
We report a complete set of strategies for characterization and an accurate determination of gold in metallic nanoparticles. For this, gold nanorods (AuNR) were synthesized by using the surfactant hexadecyltrimethylammonium bromide (CTAB) as the stabilizer and shape-directing agent. The surfactant CTAB forms a bilayer structure around the nanoparticles and became a challenge for the development of the microwave-assisted decomposition of the AuNR colloid. The bilayer structure of CTAB prevents the Au release for the acidic media during the decomposition procedure. To overcome this limitation, a combination of low sample volume consumption (only 200 μL), an acidic mixture of reverse aqua regia (1:3 v/v, HCl:HNO), and sulfuric acid, and a microwave program was used. The gold quantification by ICP-MS and checked through the ICP OES, demonstrated that the seed-mediated growth method used for the AuNR synthesis has a high yield, presenting ca. 100% of gold content (ca. 100 mg L of gold concentration) in the post-synthesis colloid (AuNR-total) as well as in the colloid after a washing step (AuNR-res). The microwave-assisted decomposition procedure also demonstrated to be efficient in the acidic decomposition of the gold-silver core-shell nanoparticle (Au@AgNR), which presents a high content of polyvinylpyrrolidone (PVP) (Mw ~55000 g mol) acting as a stabilizer, in addition to the matrix with CTAB. The results demonstrated an accurate recovery of ca. 100% of gold content for the Au@AgNR regarding the gold nanorod before the growth of the silver shell (AuNR_Core). The proposed microwave-assisted decomposition platform demonstrated to be an efficient, reliable, and robust characterization tool for the gold quantification in metallic nanoparticles, presenting no interference of the complex matrix with high organic content.
我们报告了一套完整的策略,用于对金纳米粒子进行特性描述和准确测定。为此,我们使用十六烷基三甲基溴化铵(CTAB)作为稳定剂和形状导向剂合成了金纳米棒(AuNR)。CTAB 表面活性剂在纳米颗粒周围形成双层结构,这对微波辅助 AuNR 胶体分解的发展构成了挑战。双层 CTAB 结构阻止 Au 在分解过程中释放到酸性介质中。为了克服这一限制,我们采用了低样品体积消耗(仅 200 μL)、反王水(HCl:HNO,1:3 v/v)和硫酸的酸性混合物以及微波程序的组合。通过 ICP-MS 进行金定量,并通过 ICP OES 进行检查,结果表明,用于 AuNR 合成的种子介导生长法具有高收率,在合成后的胶体(AuNR-total)以及洗涤后的胶体(AuNR-res)中均具有约 100%的金含量(约 100 mg L 的金浓度)。微波辅助分解程序也证明在酸性分解金-银核壳纳米粒子(Au@AgNR)方面非常有效,该粒子具有高分子量聚乙烯吡咯烷酮(PVP)(Mw ~55000 g mol)作为稳定剂,除了 CTAB 基质外,还具有高分子量聚乙烯吡咯烷酮(PVP)(Mw ~55000 g mol)作为稳定剂。结果表明,对于 Au@AgNR,在银壳生长之前的 AuNR_Core 金纳米棒的金含量的准确回收率约为 100%。所提出的微波辅助分解平台被证明是一种高效、可靠和强大的金属纳米粒子中金定量的特性描述工具,对于高有机含量的复杂基质没有干扰。