Purohit Pablo, Fortes Francisco J, Laserna J Javier
UMALASERLAB, Departamento de Química Analítica, Universidad de Málaga, C/Jiménez Fraud 4, Malaga 29010, Spain.
Anal Chem. 2021 Feb 2;93(4):2635-2643. doi: 10.1021/acs.analchem.0c04827. Epub 2021 Jan 5.
In the present work, the authors introduce a shape-specific methodology for evaluating the full elemental composition of single micro- and nanoparticles fabricated by laser ablation of bulk targets. For this purpose, bronze samples were directly ablated within an ablation cell, originating dry aerosols consisting of multielemental particles. The in situ generated particles were first optically trapped using air at atmospheric pressure as medium and, then, probed by laser-induced breakdown spectroscopy (LIBS). A key aspect of this technology is the circumvention of possible material losses owing to transference into the inspection instrument while providing the high absolute sensitivity of single-particle LIBS analysis. From the results, we deepen the knowledge in laser-particle interaction, emphasizing fundamental aspects such as matrix effects and polydispersity during laser ablation. The dual role of air as the atomization and excitation source during the laser-particle interaction is discussed on the basis of spectral evidences. Fractionation was one of the main hindrances as it led to particle compositions differing from that of the bulk material. To address possible preferential ablation of some species in the laser-induced plasma, two fluence regimes were used for particle production, 23 and 110 J/cm. LIBS analysis revealed a relationship between chemical composition of the individual particles and their sizes. At 110 J/cm, 65% of the dislodged particles were distributed in the range of 100-500 nm, leading to a higher variability of the LIBS spectra among the inspected nanoparticles. In contrast, at 23 J/cm, around 30% of the aerosolized particles were larger than 1 μm. At this regime, the composition better resembled the bulk material. Therefore, we present a pathway to evaluate how adequate the fabrication parameters are toward yielding particles of a specific morphology while preserving compositional resemblance to the parent bulk sample.
在本工作中,作者介绍了一种形状特定的方法,用于评估通过对块状靶材进行激光烧蚀制备的单个微米和纳米颗粒的完整元素组成。为此,在烧蚀池中直接对青铜样品进行烧蚀,产生由多元素颗粒组成的干燥气溶胶。原位生成的颗粒首先在大气压力下以空气为介质进行光学捕获,然后用激光诱导击穿光谱法(LIBS)进行探测。该技术的一个关键方面是避免了由于转移到检测仪器中而可能造成的材料损失,同时提供了单颗粒LIBS分析的高绝对灵敏度。从结果中,我们加深了对激光与颗粒相互作用的认识,强调了诸如激光烧蚀过程中的基体效应和多分散性等基本方面。基于光谱证据讨论了空气在激光与颗粒相互作用过程中作为雾化和激发源的双重作用。分馏是主要障碍之一,因为它导致颗粒组成与块状材料不同。为了解决激光诱导等离子体中某些物种可能的优先烧蚀问题,使用了两种能量密度 regime 来产生颗粒,分别为23和110 J/cm²。LIBS分析揭示了单个颗粒的化学成分与其尺寸之间的关系。在110 J/cm²时,65%的被去除颗粒分布在100 - 500 nm范围内,导致被检测纳米颗粒的LIBS光谱具有更高的变异性。相比之下,在23 J/cm²时,约30%的雾化颗粒大于1μm。在这种情况下,其组成更类似于块状材料。因此,我们提出了一条途径,以评估制备参数在产生特定形态颗粒同时保持与母体块状样品组成相似性方面的充分程度。