Lumen air pressure (LAP) affecting greywater treatment in an oxygen-based membrane biofilm reactor (O-MBfR).

Several technologies have been employed to treat greywater (GW) for domestic use. Aerobic biological treatment has achieved high efficiency, the main cost being the necessary source of oxygen (O). This study explores the effects of lumen air pressure (LAP) on reactor performance and microbial community succession in an O-based membrane biofilm reactor (O-MBfR) treating GW. At high LAP (≥0.8 psi), the dissolved oxygen (DO) concentration inside the reactor was higher than 0.38 ± 0.02 mg/L, leading to removal efficiencies of 90%, 98%, and 80%, of total chemical oxygen demand, total linear alkylbenzene sulfonate (LAS), and total nitrogen, respectively. Lower LAP (<0.8 psi) led to a decrease in DO inside the system, and a less effective GW treatment. Low O pressure decreased organic biodegradation and ammoniation, and caused LAS accumulation in the biofilm, leading to the solubilization of extracellular polymeric substances and cell lysis. Comprehensive consideration of reactor performance and energy input, DO inside the MBfR at 0.38 ± 0.02 mg/L could be selected as the optimized condition for GW treatment. Microbial community analyses results also revealed that improved LAP was favorable for the enrichment of LAS-biodegradation related genus (Pseudomonas, Parvibaculum, Magnetospirillum, Clostridium, Zoogloea, Dechloromonas and Mycobacterium), nitrifiers (Nitrosomonas and Sphingomonas) and facultative microorganisms (Dechloromonas, Flavobacterium, Pseudomonas, Aeromonas and Zoogloea) that can carry out denitrification under relatively high DO conditions (>0.38 mg/L), but led to the reduction of the relative abundance of heterotrophs (Acidovorax, Thermomonas, Brevundimonas and Enterobacter) that are more sensitive towards high DO conditions.