3D 打印造口底盘稳定器。
3D-Printed Ostomy Flange Stabilizer.
机构信息
Ilan E. Cosman, Department of Mechanical and Aerospace Engineering, University of California San Diego.
Daniel T. Guillou.
出版信息
J Wound Ostomy Continence Nurs. 2021;48(2):169-170. doi: 10.1097/WON.0000000000000737.
BACKGROUND
One of the coauthors with tetraplegia (quadriplegia) and a colostomy invented an ostomy flange stabilizer to act as a temporary backplate and aid in pouch changes.
DEVICE DEVELOPMENT
In an interactive design process, a 3D-printed ostomy flange stabilizer device was created. The resulting device can be adapted to 3 standard stoma appliance sizes. The stabilizer is reversible, allowing right- and left-handed people to use it on right- or left-sided stomas. Anyone with a 3D printer can print this device from an open-access Web site.
CONCLUSION
This device may be of use to many with ostomies and especially those with impaired dexterity.A 3D-printed ostomy flange stabilizer is described. 3D printing allows patient inventions to be disseminated without commercialization.
背景
一位患有四肢瘫痪（四肢麻痹）和结肠造口术的合著者发明了一种造口瓣稳定器，用作临时背板并帮助更换袋。
设备开发
在一个互动设计过程中，创建了一种 3D 打印的造口瓣稳定器设备。由此产生的设备可以适应 3 种标准造口器具尺寸。该稳定器是可逆的，允许惯用右手和左手的人在右侧或左侧造口上使用它。任何拥有 3D 打印机的人都可以从开放访问的网站上打印此设备。
结论
对于许多患有造口术的人来说，尤其是那些灵活性受损的人来说，这种设备可能会很有用。本文介绍了一种 3D 打印的造口瓣稳定器。3D 打印可以在不商业化的情况下传播患者的发明。
Zotero 插件