Suppr超能文献

腹壁腹膜前间隙充气压力的猪模型研究。

Preperitoneal insufflation pressure of the abdominal wall in a porcine model.

机构信息

Department of Mechanical Engineering, University of Nebraska-Lincoln, Lincoln, NE, 68588, USA.

Department of Surgery, University of Nebraska Medical Center, Omaha, NE, 68198, USA.

出版信息

Surg Endosc. 2022 Jan;36(1):300-306. doi: 10.1007/s00464-020-08275-z. Epub 2021 Jan 22.

Abstract

BACKGROUND

Most complications and adverse events during laparoscopic surgery occur during initial entry into the peritoneal cavity. Among them, preperitoneal insufflation occurs when the insufflation needle is incorrectly placed, and the abdominal wall is insufflated. The objective of this study was to find a range for static pressure which is low enough to allow placement of a Veress needle into the peritoneal space without causing preperitoneal insufflation, yet high enough to separate abdominal viscera from the parietal peritoneum.

METHODS

A pressure test was performed on twelve fresh porcine carcasses to determine the minimum preperitoneal insufflation pressure and the minimum initial peritoneal cavity insufflation pressure. Each porcine model had five needle placement categories. One category tested the initial peritoneal cavity insufflation pressure beneath the umbilicus. The four remaining categories tested the preperitoneal insufflation pressure at four different anatomical locations on the abdomen that can be used for initial entry. The minimum initial insufflation pressures from each carcass were then compared to the preperitoneal insufflation pressures to obtain an optimal range for initial insufflation.

RESULTS

Increasing the insufflation pressure increased the probability of preperitoneal insufflation. Also, there was a statistically significant difference (p < 0.05) between the initial peritoneal cavity insufflation pressures (8.83 ± 4.19 mmHg) and the lowest preperitoneal pressures (32.54 ± 7.84 mmHg) (mean ± SD).

CONCLUSION

Pressures greater than 10 mmHg resulted in initial cavity insufflation and pressures greater than 20 mmHg resulted in preperitoneal insufflation in porcine models. By knowing the minimum pressure required to separate the layers of the abdominal wall, the risk of preperitoneal insufflation can be mitigated while obtaining safe and efficient entry into the peritoneal cavity. The findings in this research are not a guideline for trocar or Veress needle placement, but instead reveal preliminary data which may lead to more studies, technology, etc.

摘要

背景

腹腔镜手术过程中,大多数并发症和不良事件发生在初始进入腹腔时。其中,当注气针放置位置不正确导致腹壁注气时,会发生腹膜前注气。本研究的目的是找到一个既能将 Veress 针安全地插入腹腔又不会导致腹膜前注气的静态压力范围,同时该压力范围又要足够高以将腹部内脏与壁腹膜分开。

方法

对 12 具新鲜猪尸体进行压力测试,以确定最小腹膜前注气压力和最小初始腹腔注气压力。每具猪模型有 5 个注针位置类别。一类测试脐下的初始腹腔注气压力。其余 4 个类别分别测试腹部 4 个不同解剖部位的腹膜前注气压力,这些部位可用于初始进入。然后将每个猪尸体的最小初始充气压力与腹膜前充气压力进行比较,以获得初始充气的最佳范围。

结果

增加注气压力增加了腹膜前注气的可能性。另外,初始腹腔注气压力(8.83±4.19mmHg)与最低腹膜前压力(32.54±7.84mmHg)之间存在统计学差异(p<0.05)。

结论

压力大于 10mmHg 会导致初始腔充气,压力大于 20mmHg 会导致猪模型中的腹膜前充气。通过了解分离腹壁各层所需的最小压力,可以在安全有效地进入腹腔的同时,降低腹膜前充气的风险。本研究的结果不是套管或 Veress 针放置的指南,而是提供了可能导致更多研究、技术等的初步数据。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验