Department of Physics & Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA.
Department of Radiology, University of North Carolina at Chapel Hill, Chapel Hill, NC 27514, USA.
Mil Med. 2021 Jan 25;186(Suppl 1):745-750. doi: 10.1093/milmed/usaa337.
Musculoskeletal injury to extremities is a common issue for both stateside and deployed military personnel, as well as the general public. Superposition of anatomy can make diagnosis difficult using standard clinical techniques. There is a need for increased diagnostic accuracy at the point-of-care for military personnel in both training and operational environments, as well as assessment during follow-up treatment to optimize care and expedite return to service. Orthopedic tomosynthesis is rapidly emerging as an alternative to digital radiography (DR), exhibiting an increase in sensitivity for some clinical tasks, including diagnosis and follow-up of fracture and arthritis. Commercially available digital tomosynthesis systems are large complex devices. A compact device for extremity tomosynthesis (TomoE) was previously demonstrated using carbon nanotube X-ray source array technology. The purpose of this study was to prepare and evaluate the prototype device for an Institutional Review Board-approved patient wrist imaging study and provide initial patient imaging results.
A benchtop device was constructed using a carbon nanotube X-ray source array and a flat panel digital detector. Twenty-one X-ray projection images of cadaveric specimens and human subjects were acquired at incident angles from -20 to +20 degrees in various clinical orientations, with entrance dose calibrated to commercial digital tomosynthesis wrist scans. The projection images were processed with an iterative reconstruction algorithm in 1 mm slices. Reconstruction slice images were evaluated by a radiologist for feature conspicuity and diagnostic accuracy.
The TomoE image quality was found to provide more diagnostic information than DR, with reconstruction slices exhibiting delineation of joint space, visual conspicuity of trabecular bone, bone erosions, fractures, and clear depiction of normal anatomical features. The scan time was 15 seconds and the skin entrance dose was verified to be 0.2 mGy.
The TomoE device image quality has been evaluated using cadaveric specimens. Dose was calibrated for a patient imaging study. Initial patient images depict a high level of anatomical detail and an increase in diagnostic value compared to DR.
四肢的肌肉骨骼损伤是国内外军事人员和普通公众的常见问题。解剖结构的叠加使得使用标准临床技术进行诊断变得困难。在培训和作战环境中,以及在随访治疗中评估军事人员时,都需要提高护理点的诊断准确性,以优化护理并加快重返服务。骨科断层合成术作为数字射线照相术 (DR) 的替代方法迅速崭露头角,在某些临床任务(包括骨折和关节炎的诊断和随访)中的灵敏度有所提高。市售的数字断层合成系统是大型复杂设备。先前使用碳纳米管 X 射线源阵列技术展示了一种用于四肢断层合成术 (TomoE) 的紧凑型设备。本研究的目的是准备和评估经机构审查委员会批准的患者腕关节成像研究的原型设备,并提供初步的患者成像结果。
使用碳纳米管 X 射线源阵列和平板数字探测器构建了台式设备。以各种临床方向从-20 度到+20 度采集了 21 个尸体标本和人体标本的 X 射线投影图像,入口剂量校准为商用数字断层合成腕部扫描。使用迭代重建算法以 1 毫米切片处理投影图像。放射科医生评估重建切片图像的特征显著性和诊断准确性。
TomoE 图像质量被发现比 DR 提供更多的诊断信息,重建切片显示关节间隙、小梁骨的视觉显著性、骨侵蚀、骨折和正常解剖特征的清晰描绘。扫描时间为 15 秒,皮肤入口剂量经证实为 0.2 mGy。
使用尸体标本评估了 TomoE 设备的图像质量。已为患者成像研究校准了剂量。初步的患者图像描绘了高水平的解剖细节,并与 DR 相比增加了诊断价值。