Fluorescence intensities of composite resins on photo images.

Recording fluorescence using flash photography, may help reduce time of capture and apply effectively in clinical practice. To test methods for visualizing composite resins fluorescence by direct digital photography. Sixty-four specimen discs (1.5 × 10 mm) were prepared from 8 different composite resin brands. Their CIELAB color coordinates (L*, a*, b*) and fluorescence were measured using a portable colorimeter and a fluorescence spectrophotometer. The mean of three measurements was recorded and then specimens were photographed by a DSLR camera with two different filters (365 nm and 405 nm) mounted on a commercial macro flash. RGB values of all specimens on the photographs were measured by using Photoshop software and converted to CIELab. Data were then analyzed using Kruskal-Wallis and Dunn's multiple comparisons tests. Correlation and regression analyses were also used to relate fluorescence and color parameters on the photographs at α = 0.05. Fluorescence and color data indicated significant differences among the materials (p < 0.05). L* a* and b* color coordinates from both photographs were highly correlated to fluorescence intensities found by the reference method (r - 0.95, r - 0.94), while regression analysis indicated a strong linear relationship (R - 0.88, R - 0.89). The study showed that filtered flash photography either by the use of a 365 nm or a 405 nm band pass filter can directly visualize fluorescence of composite resin materials and differences in fluorescence between them.