Schmidt Jennifer A, Richter Lubna V, Condoluci Lisa A, Ahner Beth A
Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY, USA.
Biotechnol Biofuels. 2021 Feb 10;14(1):42. doi: 10.1186/s13068-021-01893-2.
The global demand for functional proteins is extensive, diverse, and constantly increasing. Medicine, agriculture, and industrial manufacturing all rely on high-quality proteins as major active components or process additives. Historically, these demands have been met by microbial bioreactors that are expensive to operate and maintain, prone to contamination, and relatively inflexible to changing market demands. Well-established crop cultivation techniques coupled with new advancements in genetic engineering may offer a cheaper and more versatile protein production platform. Chloroplast-engineered plants, like tobacco, have the potential to produce large quantities of high-value proteins, but often result in engineered plants with mutant phenotypes. This technology needs to be fine-tuned for commercial applications to maximize target protein yield while maintaining robust plant growth.
Here, we show that a previously developed Nicotiana tabacum line, TetC-cel6A, can produce an industrial cellulase at levels of up to 28% of total soluble protein (TSP) with a slight dwarf phenotype but no loss in biomass. In seedlings, the dwarf phenotype is recovered by exogenous application of gibberellic acid. We also demonstrate that accumulating foreign protein represents an added burden to the plants' metabolism that can make them more sensitive to limiting growth conditions such as low nitrogen. The biomass of nitrogen-limited TetC-cel6A plants was found to be as much as 40% lower than wildtype (WT) tobacco, although heterologous cellulase production was not greatly reduced compared to well-fertilized TetC-cel6A plants. Furthermore, cultivation at elevated carbon dioxide (1600 ppm CO) restored biomass accumulation in TetC-cel6A plants to that of WT, while also increasing total heterologous protein yield (mg Cel6A plant) by 50-70%.
The work reported here demonstrates that well-fertilized tobacco plants have a substantial degree of flexibility in protein metabolism and can accommodate considerable levels of some recombinant proteins without exhibiting deleterious mutant phenotypes. Furthermore, we show that the alterations to protein expression triggered by growth at elevated CO can help rebalance endogenous protein expression and/or increase foreign protein production in chloroplast-engineered tobacco.
全球对功能蛋白的需求广泛、多样且持续增长。医学、农业和工业制造都依赖高质量蛋白质作为主要活性成分或加工添加剂。从历史上看,这些需求一直通过微生物生物反应器来满足,但其运行和维护成本高昂,容易受到污染,并且相对难以适应不断变化的市场需求。成熟的作物种植技术与基因工程的新进展相结合,可能会提供一个更便宜、更通用的蛋白质生产平台。叶绿体工程植物,如烟草,有潜力生产大量高价值蛋白质,但往往会导致工程植物出现突变表型。这项技术需要针对商业应用进行微调,以在保持植物健壮生长的同时最大化目标蛋白产量。
在此,我们表明,先前开发的烟草品系TetC-cel6A能够产生一种工业纤维素酶,其含量高达总可溶性蛋白(TSP)的28%,具有轻微的矮化表型,但生物量没有损失。在幼苗中,通过外源施用赤霉素可恢复矮化表型。我们还证明,积累外源蛋白对植物的新陈代谢构成了额外负担,这会使它们对诸如低氮等限制生长条件更加敏感。尽管与施肥良好的TetC-cel6A植物相比,异源纤维素酶的产量没有大幅降低,但发现氮限制的TetC-cel6A植物的生物量比野生型(WT)烟草低多达40%。此外,在高二氧化碳浓度(1600 ppm CO)下培养可使TetC-cel6A植物的生物量积累恢复到WT水平,同时还使总异源蛋白产量(mg Cel6A/株)提高了50 - 70%。
本文报道的工作表明,施肥良好的烟草植物在蛋白质代谢方面具有很大程度的灵活性,能够容纳相当水平的一些重组蛋白而不表现出有害的突变表型。此外,我们表明,高浓度CO₂ 生长引发的蛋白质表达变化有助于重新平衡叶绿体工程烟草中的内源蛋白表达和/或增加外源蛋白产量。