A Comparative Study to Evaluate the Accuracy of Various Spacer Thickness for Polyvinyl Siloxane Putty-wash Impression Techniques: An Study.

INTRODUCTION

An accurate impression is one of the prime factors for success of any restoration, more so in field of fixed prosthodontics. The critical aspect is to reproduce fine surface details along with ease of use. Knowledge of impression materials and the techniques to which each is best suited is essential in achieving consistent results.

OBJECTIVE OF THE STUDY

The purpose of this study is to evaluate the accuracy of various putty-wash techniques in a laboratory model that simulated the clinical practice.

MATERIALS AND METHODS

A metal master model, containing three full crowns fixed partial denture (FPD) abutment preparations, was fabricated. A perforated custom tray was fabricated that can be placed in the same position on the master model for each impression. For each technique, 10 impressions of the master model were made and poured using a die stone. The measurements were made of the models using a measuroscope and the accuracy of the impressions was recorded.

RESULTS

The statistical comparison between groups I, II, III, and IV casts measurements by using the Mann-Whitney test showed highly significant statistical difference between the various groups from each other ( < 0.001).

CONCLUSION

The accuracy of the working casts obtained from group III impression (two-step using 1 mm coping) was the best, whereas it was least with group II impression (two-step using polyethylene spacer).

HOW TO CITE THIS ARTICLE

Gautam N, Ahmed R, Sharma S, A Comparative Study to Evaluate the Accuracy of Various Spacer Thickness for Polyvinyl Siloxane Putty-wash Impression Techniques: An Study. Int J Clin Pediatr Dent 2020;13(5):536-542.