Coupling transformation of carbon, nitrogen and sulfur in a long-term operated full-scale constructed wetland.

The coupling transformation of carbon, nitrogen and sulfur compounds has been studied in lab-scale and pilot-scale constructed wetlands (CWs), but few studies investigated full-scale CW. In this study, we used batch experiments to investigate the potentials of carbon, nitrogen and sulfur transformation in a long-term operated, full-scale horizontal subsurface flow wetland. The sediments collected from the HSFW were incubated for 48 h in the laboratory with supplying various dosages of carbon, nitrogen and sulfur compounds. The results showed that heterotrophic denitrification was the main pathway. At the same time, the sulfide (S)-based autotrophic denitrification was also present. Increasing TOC concentration or NO concentration could promote heterotrophic denitrification but did not inhibit the sulfide-based autotrophic denitrification. In our experiment, the highest NO removal via autotrophic denitrification was 25.23% while that via heterotrophic denitrification was 73.66%, leading to the total NO removal of 98.89%. The results also demonstrated that NO rather than NO was the preferable electron acceptor for both heterotrophic and sulfide-based autotrophic denitrification in the CW. Increasing S concentrations promote NO removal from 12.99% to 25.23% without organic carbon, but varying NO or NO has no effects. These results indicated that concentrations of S, instead of NO or NO, was the limiting factor for sulfide-based autotrophic denitrification in the studied CW. The microbial community analysis and correlation analysis between the transformation of carbon, nitrogen and sulfur compounds and relative abundance of bacteria further confirmed that in the CW, the key pathways coupling transformation were heterotrophic denitrification and sulfide-based autotrophic denitrification. Overall, the current study will enhance understanding of carbon, nitrogen, and sulfur transformation in CW and support better design and treatment efficiency.