Suppr超能文献

单周期原子层沉积涂层纤维素纸上的热刺激润湿性转变:液滴操纵和热图案化纸流体学的应用

Thermally Stimulated Wettability Transformations on One-Cycle Atomic Layer Deposition-Coated Cellulosic Paper: Applications for Droplet Manipulation and Heat Patterned Paper Fluidics.

作者信息

Li Yi, Wooding Jamie P, McGuinness Emily K, Sun Yici, Losego Mark D

机构信息

School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States.

Renewable Bioproducts Institute, Georgia Institute of Technology, Atlanta, Georgia 30332, United States.

出版信息

ACS Appl Mater Interfaces. 2021 Mar 24;13(11):13802-13812. doi: 10.1021/acsami.0c22672. Epub 2021 Mar 12.

Abstract

Cellulosic materials are widely used in daily life for paper products and clothing as well as for emerging applications in sustainable packaging and inexpensive medical diagnostics. Cellulose has a high density of hydroxyl groups that create strong intra- and interfiber hydrogen bonding. These abundant hydroxyl groups also make cellulose superhydrophilic. Schemes for hydrophobization and spatially selective hydrophobization of cellulosic materials can expand the application space for cellulose. Cellulose is often hydrophobized through wet chemistry surface modification methods. This work reports a new modification method using a combination of atomic layer deposition (ALD) and atmospheric heating to alter the wettability of purely cellulosic chromatography paper. We find that once the cellulosic paper is coated with a single ALD cycle (1cy-ALD) of AlO, it can be made sticky superhydrophobic after a 150 °C ambient post-ALD heating step. An X-ray photoelectron spectroscopy investigation reveals that the ALD-modified cellulosic surface becomes more susceptible to adsorption of adventitious carbon upon heating than an untreated cellulosic surface. This conclusion is further supported by the ability to use alternating air plasma and heat treatments to reversibly transition between the hydrophilic and hydrophobic states. We attribute the apparent abruptness of this wetting transition to a Cassie-Wenzel-like phenomenon, which is also consistent with the sticky hydrophobic wetting behavior. Using scanning probe methods, we show that the surfaces have roughness at multiple length scales. Using a Cassie-Wenzel model, we show how a small change in the surface's Young's contact angle-upon adsorption of adventitious carbon-can lead to an abrupt increase in hydrophobicity for surfaces with such roughnesses. Finally, we demonstrate the ability to spatially pattern the wettability on these 1cy-ALD-treated cellulosic papers via selective heating. This ALD-treated hydrophobic paper also shows promise for microliter droplet manipulation and patterned lab-on-paper devices.

摘要

纤维素材料在日常生活中广泛应用于纸制品、服装以及可持续包装和廉价医疗诊断等新兴应用领域。纤维素具有高密度的羟基,这些羟基会形成强大的纤维内和纤维间氢键。这些丰富的羟基也使纤维素具有超亲水性。纤维素材料的疏水化和空间选择性疏水化方案可以扩大纤维素的应用空间。纤维素通常通过湿化学表面改性方法进行疏水化处理。这项工作报道了一种新的改性方法,即结合原子层沉积(ALD)和常压加热来改变纯纤维素色谱纸的润湿性。我们发现,一旦纤维素纸用一个ALD循环(1cy - ALD)的AlO进行涂覆,在150°C的ALD后常压加热步骤后,它可以变得具有粘性的超疏水。X射线光电子能谱研究表明,与未处理的纤维素表面相比,经ALD改性的纤维素表面在加热时更容易吸附外来碳。交替使用空气等离子体和热处理能够在亲水和疏水状态之间可逆转变,这进一步支持了这一结论。我们将这种润湿转变的明显突变归因于类似Cassie - Wenzel的现象,这也与粘性疏水润湿行为一致。使用扫描探针方法,我们表明这些表面在多个长度尺度上具有粗糙度。使用Cassie - Wenzel模型,我们展示了在吸附外来碳时表面杨氏接触角的微小变化如何导致具有这种粗糙度的表面疏水性突然增加。最后,我们展示了通过选择性加热在这些经1cy - ALD处理的纤维素纸上对润湿性进行空间图案化的能力。这种经ALD处理的疏水纸在微升液滴操纵和图案化纸基实验室设备方面也显示出前景。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验