Suppr超能文献

立体定向神经外科手术中N定位器系统误差的蒙特卡洛模拟:改进的新建议

Monte Carlo Simulation of Errors for N-localizer Systems in Stereotactic Neurosurgery: Novel Proposals for Improvements.

作者信息

Sedrak Mark, Alaminos-Bouza Armando L, Bruna Andres, Brown Russell A

机构信息

Neurosurgery, Kaiser Permanente, Redwood City, USA.

Medical Physics, Mevis Informática Médica Ltda, São Paulo, BRA.

出版信息

Cureus. 2021 Feb 17;13(2):e13393. doi: 10.7759/cureus.13393.

Abstract

INTRODUCTION

Frame-based stereotaxis has been widely utilized for precise neurosurgical procedures throughout the world for nearly 40 years. The N-localizer is an integral component of most of the extant systems. Analysis of targeting errors related to the N-localizer has not been carried out in sufficient detail. We highlight these potential errors and develop methods to reduce them.  Methods: N-localizer systems comprising three and four N-localizers of various geometries were analyzed using Monte Carlo (MC) simulations. The simulations included native and altered geometric dimensions (Width [W] x Height [H]). Errors were computed using the MC simulations that included the x- and y-axes of vertically oriented rods, that altered the W/H ratio, and that added a fourth N-localizer to a three N-localizer system.  Results: The inclusion of an overdetermined system of equations and the geometries of the N-localizer systems had significant effects on target errors. Root Mean Square Errors (RMS-e) computed via millions of MC iterations for each study demonstrated that errors were reduced by (1) inclusion of the x- and y-coordinates of the vertically oriented rods, (2) a greater triangular area enclosed by the diagonal fiducials of the N-localizer system (stereotactic triangle), (3) a larger W/H ratio, and (4) an N-localizer system that comprised four N-localizers.

CONCLUSION

Monte Carlo simulations of Root Mean Square error (RMS-e) is a useful technique to understand targeting while using N-localizer systems in stereotactic neurosurgery. The application of vertical rod positions enhances computational accuracy and can be performed on any N-localizer system. Keeping the target point within the stereotactic triangle enclosed by the diagonal rods can also reduce errors. Additional optimizations of N-localizer geometry may also reduce potential targeting errors. Further analysis is needed to confirm these findings which may have clinical importance.

摘要

引言

基于框架的立体定向技术在全球范围内已被广泛应用于精确神经外科手术近40年。N定位器是大多数现有系统的一个组成部分。尚未对与N定位器相关的靶向误差进行足够详细的分析。我们强调了这些潜在误差并开发了减少它们的方法。方法:使用蒙特卡罗(MC)模拟分析了由不同几何形状的三个和四个N定位器组成的N定位器系统。模拟包括原始和改变后的几何尺寸(宽度[W]×高度[H])。使用包括垂直定向杆的x轴和y轴、改变W/H比以及在三个N定位器系统中添加第四个N定位器的MC模拟来计算误差。结果:方程组的超定系统的纳入以及N定位器系统的几何形状对目标误差有显著影响。通过对每项研究进行数百万次MC迭代计算得出的均方根误差(RMS-e)表明,误差通过以下方式降低:(1)纳入垂直定向杆的x坐标和y坐标;(2)N定位器系统(立体定向三角形)的对角基准所围成的更大三角形面积;(3)更大的W/H比;(4)由四个N定位器组成的N定位器系统。结论:均方根误差(RMS-e)的蒙特卡罗模拟是一种有用的技术,可用于理解在立体定向神经外科手术中使用N定位器系统时的靶向情况。垂直杆位置的应用提高了计算精度,并且可以在任何N定位器系统上进行。将目标点保持在对角杆所围成的立体定向三角形内也可以减少误差。N定位器几何形状的进一步优化也可能减少潜在的靶向误差。需要进一步分析以证实这些可能具有临床重要性的发现。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/b895/7977485/ebc940d94100/cureus-0013-00000013393-i01.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验