Suppr超能文献

基于苹果果胶并经黄原胶改性的复合配方用于制备具有吞咽困难友好潜力的增稠基质的流变学和质地特性

Rheological and Textural Properties of Apple Pectin-Based Composite Formula with Xanthan Gum Modification for Preparation of Thickened Matrices with Dysphagia-Friendly Potential.

作者信息

Yang Huaiwen, Tsai Chai-Chun, Jiang Jung-Shiun, Hua Chi-Chung

机构信息

Department of Food Science, National Chiayi University, Chiayi 60004, Taiwan.

Department of Chemical Engineering, National Chung Cheng University, Chiayi 62102, Taiwan.

出版信息

Polymers (Basel). 2021 Mar 12;13(6):873. doi: 10.3390/polym13060873.

Abstract

Modifying the consistency of a given edible fluid matrix by incorporating food thickeners is a common nursing remedy for individuals with dysphagia when adequate water consumption is a concern. As apple pectin (AP) offers nutraceutical benefits, properly formulated apple pectin (AP)-based thickeners featuring xanthan gum (XG) can be superior candidates for preparation of dysphagia-friendly matrices (DFMs). Our recruited DFMs exhibit fluid-like behavior (loss modulus > storage modulus, G" > G') at lower AP concentrations (2 and 5%, /); they turn into weak/critical gels (G' ≈ G") as the concentration becomes higher (9%). In contrast, XG-DFMs display gel-like attributes with G' > G", even at rather low concentrations (<1%) and become more resistant to sugar, Na, and Ca modifications. The composite matrix of AP1.8XG0.2 (constraint at 2%) exhibits a confined viscosity of 278 ± 11.7 mPa∙s, which is considered a DFM, in comparison to only AP- or XG-thickened ones. The hardness measurements of XG0.6 and AP1.2XG0.8 are 288.33 ± 7.506 and 302.00 ± 9.849 N/m, respectively, which potentially represent a promising formulation base for future applications with DFMs; these textural values are not significantly different from a commercially available product ( > 0.05) for dysphagia nursing administrations.

摘要

当需要关注足够的水摄入量时,通过加入食品增稠剂来改变给定可食用流体基质的稠度是吞咽困难患者常见的护理补救措施。由于苹果果胶(AP)具有营养保健功效,以黄原胶(XG)为特色的经过适当配方的苹果果胶(AP)基增稠剂可能是制备吞咽困难友好型基质(DFM)的优质候选材料。我们招募的DFM在较低的AP浓度(2%和5%,/)下表现出类似流体的行为(损耗模量>储能模量,G">G');随着浓度升高(9%),它们会变成弱/临界凝胶(G'≈G")。相比之下,XG-DFM即使在相当低的浓度(<1%)下也表现出G'>G"的凝胶状特性,并且对糖、钠和钙的改性更具抗性。与仅用AP或XG增稠的基质相比,AP1.8XG0.2(浓度为2%)的复合基质表现出278±11.7 mPa∙s的极限粘度,这被认为是一种DFM。XG0.6和AP1.2XG0.8的硬度测量值分别为288.33±7.506和302.00±9.849 N/m,这可能代表了未来DFM应用的一个有前景的配方基础;这些质地值与吞咽困难护理管理的市售产品相比没有显著差异(>0.05)。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/1bba/8001684/1029383dc77e/polymers-13-00873-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验