Fourier-Domain Ultrasonic Imaging of Cortical Bone Based on Velocity Distribution Inversion.

There is a significant acoustic impedance contrast between the cortical bone and the surrounding soft tissue, resulting in difficulty for ultrasound penetration into bone tissue with high frequency. It is challenging for the conventional pulse-echo modalities to give accurate cortical bone images using uniform sound velocity model. To overcome these limitations, an ultrasound imaging method called full-matrix Fourier-domain synthetic aperture based on velocity inversion (FM-FDSA-VI) was developed to provide accurate cortical bone images. The dual linear arrays were located on the upper and lower sides of the imaging region. After full-matrix acquisition with two identical linear array probes facing each other, travel-time inversion was used to estimate the velocity distribution in advance. Then, full-matrix Fourier-domain synthetic aperture (FM-FDSA) imaging based on the estimated velocity model was applied twice to image the cortical bone, utilizing the data acquired from top and bottom linear array, respectively. Finally, to further improve the image quality, the two images were merged to give the ultimate result. The performance of the method was verified by two simulated models and two bone phantoms (i.e., regular and irregular hollow bone phantom). The mean relative errors of estimated sound velocity in the region-of-interest (ROI) are all below 12%, and the mean errors of cortical section thickness are all less than 0.3 mm. Compared to the conventional synthetic aperture (SA) imaging, the FM-FDSA-VI method is able to accurately image cortical bone with respect to the structure. Moreover, the result of irregular bone phantom was close to the image scanned by microcomputed tomography ( μ CT) in terms of macro geometry and thickness. It is demonstrated that the proposed FM-FDSA-VI method is an efficient way for cortical bone ultrasonic imaging.