Department of Radiology, University of Texas Southwestern Medical Center, 5323 Harry Hines Blvd, Dallas, TX, 75390-9061, USA.
Eur Radiol. 2021 Oct;31(10):8060-8067. doi: 10.1007/s00330-021-07886-x. Epub 2021 Apr 15.
To develop a dual-energy CT method for differentiating and quantifying high-Z contrast elements and to evaluate the limitations based on element concentration and atomic number by using an anthropomorphic phantom study.
Mass spectrometry standards for iodine, barium, gadolinium, ytterbium, tantalum, gold, and bismuth were diluted from 10.0 to 0.3 mg/mL, placed inside 7-mL vials, and scanned with dual-energy CT using an abdominal phantom and cylindrical water-filled insert. This procedure was repeated with all seven high-Z elements at six isoattenuating values from 250 to 8 HU. Quantification accuracy was measured using a linear regression model and residual error analysis with 90% limits of agreement. The limit of detection for each element was evaluated using the limit of blank of water. Pairwise differentiation of isoattenuating vials was evaluated using AUC values and the difference in fit angles between the two elements.
Each high-Z element had a unique concentration vector in a two-dimensional plot of Compton scattering versus photoelectric effect attenuations. Mean quantification values were within ± 0.1 mg/mL of the true values for each element with no proportional bias. Limits of detection ranged from 0.35 to 0.56 mg/mL. Pairwise differentiations were proportional to the isoattenuating HU and the angle between the linear fits with mean AUC values increasing from 0.61 to 0.98 at 8 to 250 HU, respectively.
Dual-energy CT can differentiate and quantify isoattenuating high-Z elements. The high-attenuation characteristics and unique concentration vectors of ytterbium, tantalum, gold, and bismuth are well suited for new dual-energy CT contrast agents especially when simultaneously imaged with iodine, barium, or gadolinium.
• Dual-energy CT can accurately quantify high-Z contrast elements and readily differentiate iodine, barium, and gadolinium from ytterbium, tantalum, gold, and bismuth. • The differentiation and quantification capabilities for high-Z contrast elements are largely unaffected by phantom size and transaxial location within the phantom. • Potential benefits of new CT contrast agents based on these high-Z elements include alternatives for patients with iodine sensitivity, high conspicuity at both 120 and 140 kVp, simultaneous imaging of two contrast agents, and reduced injection volume.
开发一种双能 CT 方法,用于区分和量化高 Z 对比元素,并通过人体模型研究基于元素浓度和原子数来评估其局限性。
使用质谱仪将碘、钡、钆、镱、钽、金和铋标准物质从 10.0 毫克/毫升稀释至 0.3 毫克/毫升,置于 7 毫升小瓶中,使用腹部体模和圆柱形充水插件进行双能 CT 扫描。在从 250 到 8 HU 的六个等衰减值下,对所有七种高 Z 元素重复此过程。使用线性回归模型和 90%一致性界限的残差分析来测量定量准确性。使用水空白的检出限评估每个元素的检出限。使用 AUC 值和两个元素之间拟合角度的差异评估等衰减小瓶的两两区分。
每个高 Z 元素在康普顿散射与光电效应衰减的二维图中都有一个独特的浓度向量。每个元素的平均定量值与真实值的偏差在±0.1 毫克/毫升内,不存在比例偏差。检出限范围为 0.35 至 0.56 毫克/毫升。两两区分与等衰减 HU 成正比,与线性拟合之间的角度也成正比,平均 AUC 值分别从 8 到 250 HU 的 0.61 增加到 0.98。
双能 CT 可以区分和量化等衰减的高 Z 元素。镱、钽、金和铋的高衰减特性和独特的浓度向量非常适合新的双能 CT 对比剂,特别是与碘、钡或钆同时成像时。
双能 CT 可以准确地量化高 Z 对比元素,并能轻易区分碘、钡和钆与镱、钽、金和铋。
高 Z 对比元素的区分和量化能力基本不受体模大小和体模内横截面积的影响。
基于这些高 Z 元素的新型 CT 对比剂的潜在优势包括:为对碘敏感的患者提供替代方案、在 120 和 140 kVp 下具有高对比、同时对两种对比剂进行成像以及减少注射体积。