Chen Rubing, Hu Yongqin, Chen Meizhu, An Jia, Lyu Ying, Liu Yufei, Li Dongling
Key Laboratory of Optoelectronic Technology & Systems (Chongqing University), Ministry of Education, Chongqing 400044, China.
Center for Intelligent Sensing Technology (CIST), College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China.
ACS Omega. 2021 Mar 30;6(14):9828-9833. doi: 10.1021/acsomega.1c00507. eCollection 2021 Apr 13.
Developing rapid, efficient, highly sensitive, simple, stable, and low-cost virus marker detection products that are appropriate for basic facilities is of great importance in the early diagnosis and treatment of viruses. Naked-eye detection methods are especially important when medical testing facilities are limited. Polystyrene nanospheres (PSs) with catalytic and specific recognition functions were successfully developed by simultaneously modifying catalase and goat anti-hepatitis B surface antibodies on nanospheres. The modified PSs contributed significantly to the amplification of the signal. Via the specific antigen-antibody reaction, the bifunctional nanospheres could be captured on microplate and then catalyzed the decomposition of hydrogen peroxide to reduce chloroauric acid and synthesize gold nanoparticles (AuNPs). Due to the surface plasmon resonance of AuNPs, the solution color change could be observed with the naked eye and the limit of detection (LOD) was 0.1 ng/mL. Furthermore, the LOD observed with instrumentation was 0.01 ng/mL, which meant that a rapid, efficient, and highly sensitive method for the detection of hepatitis B surface antigens was successfully developed, and neither complex sample pretreatment nor expensive equipment was needed.
开发适用于基层设施的快速、高效、高灵敏度、简单、稳定且低成本的病毒标志物检测产品对于病毒的早期诊断和治疗至关重要。当医学检测设施有限时,肉眼检测方法尤为重要。通过在纳米球上同时修饰过氧化氢酶和山羊抗乙型肝炎表面抗体,成功开发出具有催化和特异性识别功能的聚苯乙烯纳米球(PSs)。修饰后的PSs对信号放大有显著贡献。通过特异性抗原-抗体反应,双功能纳米球可被捕获在微孔板上,然后催化过氧化氢分解以还原氯金酸并合成金纳米颗粒(AuNPs)。由于AuNPs的表面等离子体共振,溶液颜色变化可用肉眼观察到,检测限(LOD)为0.1 ng/mL。此外,仪器检测到的LOD为0.01 ng/mL,这意味着成功开发了一种快速、高效且高灵敏度的乙型肝炎表面抗原检测方法,既不需要复杂的样品预处理,也不需要昂贵的设备。