Cazaudehore G, Monlau F, Gassie C, Lallement A, Guyoneaud R
APESA, Pôle Valorisation, Cap Ecologia, 64230 Lescar, France; Université de Pau et des Pays de l'Adour/E2S UPPA/CNRS, IPREM UMR5254, Institut des Sciences Analytiques et de Physicochimie pour l'Environnement et les Matériaux, Chimie et Microbiologie de l'Environnement, 64000 Pau, France.
APESA, Pôle Valorisation, Cap Ecologia, 64230 Lescar, France.
Sci Total Environ. 2021 Aug 25;784:146972. doi: 10.1016/j.scitotenv.2021.146972. Epub 2021 Apr 15.
Biodegradable plastics market is increasing these last decades, including for coffee capsules. Anaerobic digestion, as a potential end-of-life scenario for plastic waste, has to be investigated. For this purpose, mesophilic (38 °C) and thermophilic (58 °C) anaerobic digestion tests on three coffee capsules made up with biodegradable plastic (Beanarella®, Launay® or Tintoretto®) and spent coffee (control) were compared by their methane production and the microbial communities active during the process. Mesophilic biodegradation of the capsules was slow and did not reach completion after 100 days, methane production ranged between 67 and 127 NL (CH) kg (VS). Thermophilic anaerobic digestion resulted in a better biodegradation and reached completion around 100 days, methane productions were between 257 and 294 NL (CH) kg (VS). The microbial populations from the reactors fed with plastics versus spent coffee grounds were significantly different, under both the mesophilic and the thermophilic conditions. However, the different biodegradable plastics only had a small impact on the main microbial community composition at a similar operational temperature and sampling time. Interestingly, the genus Tepidimicrobium was identified as a potential key microorganisms involved in the thermophilic conversion of biodegradable plastic in methane.
在过去几十年里,可生物降解塑料市场一直在增长,包括用于咖啡胶囊的可生物降解塑料。作为塑料废物的一种潜在的生命周期末期处理方案,厌氧消化必须加以研究。为此,通过比较三种由可生物降解塑料(Beanarella®、Launay®或Tintoretto®)制成的咖啡胶囊以及用过的咖啡(对照)在中温(38°C)和高温(58°C)下的厌氧消化试验的甲烷产量以及过程中活跃的微生物群落。胶囊的中温生物降解缓慢,100天后未完成,甲烷产量在67至127 NL(CH)/kg(VS)之间。高温厌氧消化导致更好的生物降解,并在100天左右完成,甲烷产量在257至294 NL(CH)/kg(VS)之间。在中温和高温条件下,用塑料喂养的反应器与用过的咖啡渣喂养的反应器中的微生物种群有显著差异。然而,在相似的操作温度和采样时间下,不同的可生物降解塑料对主要微生物群落组成的影响很小。有趣的是,嗜温微菌属被鉴定为参与可生物降解塑料高温转化为甲烷的潜在关键微生物。