Suppr超能文献

用于光电子应用的纳米结构硒化镉薄膜的制备

Fabrication of Nanostructured Cadmium Selenide Thin Films for Optoelectronics Applications.

作者信息

Hussain Shahnwaz, Iqbal Mazhar, Khan Ayaz Arif, Khan Muhammad Nasir, Mehboob Ghazanfar, Ajmal Sohaib, Ashfaq J M, Mehboob Gohar, Ahmed M Shafiq, Khisro Said Nasir, Li Chang-Jiu, Chikwenze Raphael, Ezugwu Sabastine

机构信息

State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an, China.

Department of Physics, University of Azad Jammu and Kashmir, Muzaffarabad, Pakistan.

出版信息

Front Chem. 2021 Apr 7;9:661723. doi: 10.3389/fchem.2021.661723. eCollection 2021.

Abstract

There is lot of research work at enhancing the performance of energy conversion and energy storage devices such as solar cells, supercapacitors, and batteries. In this regard, the low bandgap and a high absorption coefficient of CdSe thin films in the visible region, as well as, the low electrical resistivity make them ideal for the next generation of chalcogenide-based photovoltaic and electrochemical energy storage devices. Here, we present the properties of CdSe thin films synthesized at temperatures (below 100°C using readily available precursors) that are reproducible, efficient and economical. The samples were characterized using XRD, FTIR, RBS, UV-vis spectroscopy. Annealed samples showed crystalline cubic structure along (111) preferential direction with the grain size of the nanostructures increasing from 2.23 to 4.13 nm with increasing annealing temperatures. The optical properties of the samples indicate a small shift in the bandgap energy, from 2.20 to 2.12 eV with a decreasing deposition temperature. The band gap is suitably located in the visible solar energy region, which make these CdSe thin films ideal for solar energy harvesting. It also has potential to be used in electrochemical energy storage applications.

摘要

有许多研究工作致力于提高能量转换和能量存储设备的性能,如太阳能电池、超级电容器和电池。在这方面,CdSe薄膜在可见光区域具有低带隙和高吸收系数,以及低电阻率,使其成为下一代基于硫族化物的光伏和电化学能量存储设备的理想选择。在此,我们展示了在低温(使用易得的前驱体在100°C以下)合成的CdSe薄膜的特性,这些特性具有可重复性、高效性和经济性。使用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、卢瑟福背散射(RBS)、紫外-可见光谱对样品进行了表征。退火后的样品沿(111)择优方向呈现出立方晶体结构,随着退火温度的升高,纳米结构的晶粒尺寸从2.23纳米增加到4.13纳米。样品的光学性质表明,随着沉积温度的降低,带隙能量有小的偏移,从2.20电子伏特降至2.12电子伏特。带隙恰当地位于可见太阳能区域,这使得这些CdSe薄膜成为收集太阳能的理想选择。它还具有用于电化学能量存储应用的潜力。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/62fc/8058377/0fd0c32479af/fchem-09-661723-g0001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验