Ding Ming, Overgaard Søren
Orthopedic Research Laboratory, Department of Orthopedic Surgery & Traumatology, Odense University Hospital, And Department of Clinical Research, University of Southern Denmark, 5000, Odense, C, Denmark.
Department of Orthopaedic Surgery & Traumatology, Copenhagen University Hospital, Bispebjerg, And Department of Clinical Medicine, University of Copenhagen, 2400, Copenhagen, NV, Denmark.
J Orthop Translat. 2021 Apr 20;28:159-168. doi: 10.1016/j.jot.2021.02.002. eCollection 2021 May.
We quantify 3-D microarchitectural properties of femoral head cancellous bones from patients with rheumatoid arthritis (RA, n = 12), osteoarthritis (OA, n = 15), osteoporosis (OP, n = 24), or donor controls (CNT, n = 8); and investigate their rod- and plate-like trabecular morphometric properties of trabecular bone tissues and compare these properties between them.
Femoral heads were harvested during total hip replacement surgeries or collected from donors. Four cubic cancellous bone samples produced from each femoral head were micro-CT scanned to quantify their microarchitectural and rod- and plate-like trabecular properties. The samples were then tested in compression to determine mechanical properties.
The microarchitectural properties of femoral head cancellous bone revealed significant differences among the 4 groups, but not between RA and OA. Bone volume fraction was significantly greater in the RA and the OA than in the OP and the CNT. Structure model index was significantly lower in the RA and the OA than in the OP. Number of rods in the RA was significantly greater than in the other 3 groups. Number of plates and plate volume density in the RA and the OA were significantly greater than in the OP and the CNT. Mechanical properties were significantly greater in the RA and the OA than in the OP. The single best determinant for mechanical properties was bone volume fraction.
This study demonstrates significant differences in 3-D microarchitectural properties and rod- and plate-like trabecular morphometric properties among patients with RA, OA, or OP. The RA and OA cancellous bones displayed similar patterns of microarchitectural degeneration and pronounced different microarchitectures from the OP. The OP group revealed the weakest cancellous bone strength, while the RA and OA groups exhibited a compensatory effect that maintains bone tissues, and hence mechanical properties.
The study enhances the understanding of microarchitectural degeneration of diseased cancellous bone. The OP group had the weakest cancellous bone strength, while the RA and OA groups exhibited a compensatory effect that maintains bone tissues, and hence mechanical properties. These results are particularly important for design and survival of joint prosthesis.
我们对类风湿性关节炎(RA,n = 12)、骨关节炎(OA,n = 15)、骨质疏松症(OP,n = 24)患者或供体对照(CNT,n = 8)的股骨头松质骨的三维微观结构特性进行量化;研究其骨小梁组织的杆状和板状小梁形态计量学特性,并比较它们之间的这些特性。
在全髋关节置换手术期间获取股骨头,或从供体处收集。对每个股骨头制作的四个立方松质骨样本进行显微CT扫描,以量化其微观结构以及杆状和板状小梁特性。然后对样本进行压缩测试以确定力学性能。
股骨头松质骨的微观结构特性在这四组之间存在显著差异,但RA和OA之间无差异。RA和OA组的骨体积分数显著高于OP和CNT组。RA和OA组的结构模型指数显著低于OP组。RA组的杆数量显著多于其他三组。RA和OA组的板数量和板体积密度显著高于OP和CNT组。RA和OA组的力学性能显著高于OP组。力学性能的最佳单一决定因素是骨体积分数。
本研究表明,RA、OA或OP患者的三维微观结构特性以及杆状和板状小梁形态计量学特性存在显著差异。RA和OA的松质骨显示出相似的微观结构退变模式,且与OP的微观结构明显不同。OP组的松质骨强度最弱,而RA和OA组表现出维持骨组织及力学性能的代偿效应。
该研究增强了对患病松质骨微观结构退变的理解。OP组的松质骨强度最弱,而RA和OA组表现出维持骨组织及力学性能的代偿效应。这些结果对于关节假体的设计和存活尤为重要。