Suppr超能文献

镍(II)配合物将大气中的CO固定为C1原料。

Fixation of atmospheric CO as C1-feedstock by nickel(ii) complexes.

作者信息

Muthuramalingam Sethuraman, Velusamy Marappan, Mayilmurugan Ramasamy

机构信息

Bioinorganic Chemistry Laboratory/Physical Chemistry, School of Chemistry, Madurai Kamaraj University, Madurai-625021, India.

出版信息

Dalton Trans. 2021 Jun 21;50(23):7984-7994. doi: 10.1039/d0dt03887c. Epub 2021 May 21.

Abstract

The development of molecular catalysts for the activation and conversion of atmospheric carbon dioxide (CO) into a value-added product is a great challenge. A series of nickel(ii) complexes, Ni(L)(CHCN), 1-4 of diazepane based ligands, 4-methyl-1-[(pyridin-2-yl-methyl)]-1,4-diazepane (L1), 4-methyl-1-[2-(pyridine-2-yl)ethyl]-1,4-diazepane (L2), 4-methyl-1-[(quinoline-2-yl)-methyl]-1,4-diazepane (L3) and 1-[(4-methoxy-3,5-dimethyl-pyridin-2-yl)methyl]-4-methyl-1,4-diazepane (L4), have been synthesized and characterized as catalysts for the activation of atmospheric CO. The single-crystal X-ray structure of 1 shows a distorted octahedral geometry with a cis-β configuration around the NiN coordination sphere. All the complexes are used as catalysts for the conversion of atmospheric CO and epoxides into cyclic carbonates at 1 atmosphere (atm) pressure and in the presence of EtN. Catalyst 4 was found to be the most efficient catalyst and showed a 31% formation of cyclic carbonates with a TON of 620 under 1 atm air as the CO source. This yield was enhanced to 94% with a TON of 1880 under 1 atm pure CO gas and it is the highest catalytic efficiency known for nickel(ii)-based catalysts. Catalyst 4 enabled the transformation of a wide range of epoxides (eight examples) into corresponding cyclic carbonates with excellent selectivity (>99%) and yields of 59-94% and 11-31% under pure CO and atmospheric CO, respectively. The catalytic efficiency is strongly influenced by the electronic nature of the complexes. The CO fixation reactions without an epoxide substrate led to the formation of the carbonate bridged dinuclear nickel(ii) complexes (LNi)CO1a-4a, which are speculated as catalytically active intermediates. The formation of these species was accompanied by the formation of new absorption bands around 592-681 nm and was further confirmed by the ESI-MS and IR spectral studies. The molecular structures of these carbonate-bridged key intermediates were determined by X-ray analysis. The structures contain two Ni-centers bridged via a carbonate ion that originated from CO. Distorted square pyramidal geometries are adopted around each Ni(ii) center. All these results support that CO fixation reactions occur via CO-bound nickel key intermediates.

摘要

开发用于将大气中的二氧化碳(CO₂)活化并转化为高附加值产品的分子催化剂是一项巨大挑战。合成了一系列镍(II)配合物Ni(L)(CH₃CN),即基于二氮杂环庚烷配体的1 - 4,分别为4 - 甲基 - 1 - [(吡啶 - 2 - 基甲基)] - 1,4 - 二氮杂环庚烷(L1)、4 - 甲基 - 1 - [2 - (吡啶 - 2 - 基)乙基] - 1,4 - 二氮杂环庚烷(L2)、4 - 甲基 - 1 - [(喹啉 - 2 - 基)甲基] - 1,4 - 二氮杂环庚烷(L3)和1 - [(4 - 甲氧基 - 3,5 - 二甲基吡啶 - 2 - 基)甲基] - 4 - 甲基 - 1,4 - 二氮杂环庚烷(L4),并将其表征为用于活化大气中CO₂的催化剂。配合物1的单晶X射线结构显示出扭曲的八面体几何构型,在NiN配位球周围具有顺式 - β构型。所有这些配合物都用作催化剂,在1个大气压(atm)压力下且在Et₃N存在的情况下,将大气中的CO₂和环氧化物转化为环状碳酸酯。发现催化剂4是最有效的催化剂,在以1 atm空气作为CO₂源的条件下,环状碳酸酯的形成率为31%,TON为620。在1 atm纯CO₂气体下,该产率提高到94%,TON为1880,这是已知基于镍(II)催化剂的最高催化效率。催化剂4能够将多种环氧化物(八个实例)分别在纯CO₂和大气CO₂条件下,以优异的选择性(>99%)转化为相应的环状碳酸酯,产率分别为59 - 94%和11 - 31%。催化效率受到配合物电子性质的强烈影响。没有环氧化物底物的CO₂固定反应导致形成碳酸酯桥联的双核镍(II)配合物(LNi)₂CO1a - 4a,推测其为催化活性中间体。这些物种的形成伴随着在592 - 681 nm附近新吸收带的形成,并通过ESI - MS和IR光谱研究进一步得到证实。通过X射线分析确定了这些碳酸酯桥联关键中间体的分子结构。结构中包含两个通过源自CO₂的碳酸根离子桥联的Ni中心。每个Ni(II)中心周围采用扭曲的四方锥几何构型。所有这些结果都支持CO₂固定反应是通过与CO结合的镍关键中间体发生的。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验