Karim Md Rezaul, Islam Tarikul, Repon Md Reazuddin, Al Hamim Abdullah, Rashid Muhammad Abdur, Jalil Mohammad Abdul
Department of Textile Engineering, Port City International University, Chittagong, 4202, Bangladesh.
Department of Textile Engineering, Jashore University of Science and Technology, Jashore, 7408, Bangladesh.
Heliyon. 2021 May 17;7(5):e07059. doi: 10.1016/j.heliyon.2021.e07059. eCollection 2021 May.
Water is the ultimate and mostly used media during textile materials processing, especially in colouration. This study investigated the possibilities of using seawater for cotton and polyester fabrics dyeing. Single jersey fabrics made of 100 percent cotton and polyester were dyed using a standard recipe and two separate water source as dyeing mediums. It has been focused on the assessment of colour fastness to wash, perspiration, saliva, rubbing, water, light and colour difference value due to compare the efficiency of dyeing media. The results revealed that the cotton fabric dyed with seawater showed lighter shade than that of ground water sample. But for polyester fabric darker shade was obtained compared to ground water. The cotton sample dyed with sea water carried about 15% higher colour strength than ground water dyed sample but for polyester it was very negligible, only 3%. Moreover, the results of colour fastness to wash, perspiration, saliva, rubbing, water and light for seawater dyed samples of cotton and polyester were shown satisfactory outcomes having the grading of 4-5 in most of the cases. This exploration established that commercial dyeing processes were robust and can be practically transferable into the seawater medium for cotton and polyester fabrics.
水是纺织材料加工过程中最终且使用最广泛的介质,尤其是在染色过程中。本研究调查了使用海水对棉织物和聚酯织物进行染色的可能性。采用标准配方,以两种不同的水源作为染色介质,对由100%棉和聚酯制成的单面针织物进行染色。通过比较染色介质的效率,重点评估了染色织物的耐洗色牢度、耐汗渍色牢度、耐唾液色牢度、耐摩擦色牢度、耐水色牢度、耐光色牢度以及色差。结果表明,用海水染色的棉织物色泽比用地下水染色的浅。但对于聚酯织物,用海水染色比用地下水染色的色泽更深。用海水染色的棉织物色强度比用地下水染色的样品高约15%,但对于聚酯织物,色强度差异非常小,仅为3%。此外,棉和聚酯的海水染色样品的耐洗色牢度、耐汗渍色牢度、耐唾液色牢度、耐摩擦色牢度、耐水色牢度和耐光色牢度结果显示出令人满意的结果,在大多数情况下评级为4 - 5级。该探索表明,商业染色工艺是可靠的,并且实际上可以转移到棉织物和聚酯织物的海水染色介质中。