The comprehensive measurement method of energy conservation and emission reduction in the whole process of urban sewage treatment based on carbon emission.

It is of great significance to establish a carbon emission management system and carbon emission reduction target to put forward emission reduction measures for each subunit of a sewage treatment plant. In this paper, a mathematical model was constructed for calculating carbon emission in the whole sewage treatment system process. Meanwhile, the model calculated the carbon emission changes after upgrading three sewage treatment plants and identified the critical controlling unit. The results showed that the CO produced from electric energy consumption and chemical application was the primary source of carbon emission of wastewater treatment. Raising sewage discharge standards appropriately could effectively reduce the carbon emission generated by each link of the wastewater treatment plant. Further improvement of effluent standards could adversely affect sewage treatment plants in terms of energy, resources, and greenhouse gas emissions. In addition, raising the standard of total phosphorus concentration in the effluent may lead to a corresponding increase in the amount of phosphorus removal agents, as well as an increase in indirect carbon emission, material consumption, and chemical sludge. Therefore, it is necessary to develop sewage treatment technologies that are economical, applicable, energy-saving, and environmental friendly to realize the environmental benefits of carbon emission reduction in sewage treatment and sustainable utilization of energy and resource from wastewater.