Manzolaro Mattia, Corradetti Stefano, Ballan Michele, Salomoni Riccardo, Andrighetto Alberto, Meneghetti Giovanni
National Institute of Nuclear Physics-Legnaro National Laboratories (INFN-LNL), Viale dell'Università 2, 35020 Legnaro, Padova, Italy.
Department of Industrial Engineering, University of Padova, Via Venezia 1, 35131 Padova, Italy.
Materials (Basel). 2021 May 20;14(10):2689. doi: 10.3390/ma14102689.
In the facilities for the production of Radioactive Ion Beams (RIBs) according to the Isotope Separation On-Line (ISOL) technique, a production target is typically impinged by a high-power primary beam, generating radioactive isotopes for basic research and technological applications. With the aim to guarantee an efficient extraction of the aforementioned isotopes, the production target must work in a high vacuum environment, at temperatures that are usually between 1600 °C and 2200 °C. Its main components are often characterized by intense temperature gradients and consequently by severe thermal stresses. Carbides are widely used for target manufacturing, and in this work a specific method for their thermal and mechanical characterization is presented and discussed. It is based on the comparison between experimental measurements and numerical simulations, with the introduction of the novel Virtual Thermoelastic Parameters approach for the structural verification procedure. High-performance silicon carbides (SiC) are taken as a reference to describe the method. Measured emissivity and thermal conductivity data are presented and discussed, together with the experimental estimation of material limitations for both temperature and stress fields. The aforementioned results can be promptly used for the design process of high-power ISOL targets.
