Tian Yong, Bi Zhenxiao, Cui Gan
School of Science, Qingdao University of Technology, Qingdao 266525, China.
College of Pipeline and Civil Engineering, China University of Petroleum (East China), No. 66, West Changjiang Road, Huangdao District, Qingdao 266580, China.
Polymers (Basel). 2021 May 19;13(10):1657. doi: 10.3390/polym13101657.
In order to improve the corrosion resistance of zinc-rich epoxy coatings and reduce the amount of zinc used, first, graphene oxide (GO) was modified by sulfonated multiwall carbon nanotubes (SMWCNTs) to obtain the modified graphene oxide (SM-GO). The samples were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and Raman spectroscopy. Then, four kinds of coatings were prepared, namely pure zinc-rich coating (0-ZRC), graphene oxide-based zinc-rich coating (GO-ZRC), sulfonated multiwall carbon nanotube-based zinc-rich coating (SM-ZRC) and SM-GO-based zinc-rich coating (SG-ZRC). The corrosion resistance of the above coatings was studied by open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), a salt spray test, 3D confocal microscope, and electron scanning electron microscope (SEM). The results indicate that GO is successfully non-covalently modified by SMWCNTs, of which the interlayer spacing increases and dispersion is improved. The order of the corrosion resistance is GO-ZRC > SG-ZRC > SM-ZRC > 0-ZRC. The addition of GO, SMWCNTs, and SM-GO increases the shielding effect and increases the electrical connection between Zn particles and metal substrates, which improves the corrosion resistance. However, SMWCNTs and SM-GO also strengthen the galvanic corrosion, which decreases the corrosion resistance to some extent.
为了提高富锌环氧涂层的耐腐蚀性并减少锌的用量,首先,用磺化多壁碳纳米管(SMWCNTs)对氧化石墨烯(GO)进行改性,以获得改性氧化石墨烯(SM-GO)。通过傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)和拉曼光谱对样品进行表征。然后,制备了四种涂层,即纯富锌涂层(0-ZRC)、氧化石墨烯基富锌涂层(GO-ZRC)、磺化多壁碳纳米管基富锌涂层(SM-ZRC)和SM-GO基富锌涂层(SG-ZRC)。通过开路电位(OCP)、电化学阻抗谱(EIS)、盐雾试验、三维共聚焦显微镜和电子扫描电子显微镜(SEM)研究了上述涂层的耐腐蚀性。结果表明,GO成功地被SMWCNTs非共价改性,其层间距增加且分散性得到改善。耐腐蚀性顺序为GO-ZRC>SG-ZRC>SM-ZRC>0-ZRC。GO、SMWCNTs和SM-GO的加入增加了屏蔽效应,并增加了Zn颗粒与金属基体之间的电连接,从而提高了耐腐蚀性。然而,SMWCNTs和SM-GO也增强了电偶腐蚀,在一定程度上降低了耐腐蚀性。