NINDS Electron Microscopy Facility, National Institute of Neurological Disorders and Stroke, National Institutes of Health, Bethesda, MD, 20892, USA.
Mol Brain. 2021 Jun 3;14(1):86. doi: 10.1186/s13041-021-00799-2.
Immunogold labeling allows localization of proteins at the electron microscopy (EM) level of resolution, and quantification of signals. The present paper summarizes methodological issues and experiences gained from studies on the distribution of synaptic and other neuron-specific proteins in cell cultures and brain tissues via a pre-embedding method. An optimal protocol includes careful determination of a fixation condition for any particular antibody, a well-planned tissue processing procedure, and a strict evaluation of the credibility of the labeling. Here, tips and caveats on different steps of the sample preparation protocol are illustrated with examples. A good starting condition for EM-compatible fixation and permeabilization is 4% paraformaldehyde in PBS for 30 min at room temperature, followed by 30 min incubation with 0.1% saponin. An optimal condition can then be readjusted for each particular antibody. Each lot of the secondary antibody (conjugated with a 1.4 nm small gold particle) needs to be evaluated against known standards for labeling efficiency. Silver enhancement is required to make the small gold visible, and quality of the silver-enhanced signals can be affected by subsequent steps of osmium tetroxide treatment, uranyl acetate en bloc staining, and by detergent or ethanol used to clean the diamond knife for cutting thin sections. Most importantly, verification of signals requires understanding of the protein of interest in order to validate for correct localization of antibodies at expected epitopes on particular organelles, and quantification of signals needs to take into consideration the penetration gradient of reagents and clumping of secondary antibodies.
免疫金标记法可实现蛋白质在电子显微镜(EM)水平的定位和信号定量。本文总结了通过预包埋法在细胞培养物和脑组织中研究突触和其他神经元特异性蛋白分布的方法学问题和经验。最佳方案包括仔细确定针对任何特定抗体的固定条件、精心规划的组织处理程序以及严格评估标记的可信度。本文通过实例说明了样品制备方案不同步骤的技巧和注意事项。适合 EM 的固定和通透的良好起始条件是室温下在 PBS 中使用 4%多聚甲醛固定 30 分钟,然后用 0.1%皂素孵育 30 分钟。然后可以针对每种特定抗体重新调整最佳条件。每种批次的二级抗体(与 1.4nm 小金颗粒偶联)都需要针对标记效率的已知标准进行评估。需要进行银增强以使小金颗粒可见,并且银增强信号的质量可能会受到后续的锇四氧化物处理、铀酰乙酸包埋染色以及用于清洁切割薄片的金刚石刀的去污剂或乙醇的步骤影响。最重要的是,为了验证抗体在特定细胞器的预期表位上的正确定位,需要了解感兴趣的蛋白质,并且信号的定量需要考虑试剂的渗透梯度和二级抗体的聚集。