Research Center for Environmental and Hazardous Substance Management (EHSM), Department of Environmental Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen, 40002, Thailand; Center of Excellence on Hazardous Substance Management (HSM), Bangkok, 10330, Thailand.
Research Center for Environmental and Hazardous Substance Management (EHSM), Department of Environmental Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen, 40002, Thailand; Center of Excellence on Hazardous Substance Management (HSM), Bangkok, 10330, Thailand.
Chemosphere. 2021 Nov;282:131061. doi: 10.1016/j.chemosphere.2021.131061. Epub 2021 Jun 1.
Concentration and chemical composition of dissolved organic matter (DOM) play a major role in formation and speciation of disinfection by-products, such as trihalomethanes (THMs), in water treatment plants (WTPs) during disinfection. This study characterized DOM across the process trains of WTPs using fluorescence excitation emission matrices (EEMs) together with parallel factor analysis (PARAFAC). The PARAFAC model was developed from 216 EEMs of bimonthly water samples from three WTPs in Khon Kaen, Thailand, from May 2018 to Mar 2019. Three PARAFAC components identified were humic-like DOM of terrestrial, and microbial or agricultural origin, while the one protein-like component was previously defined as tryptophan-like fluorophore. The relationships between water quality parameters, including the maximum fluorescent intensities (F) of PARAFAC components and THM formation potential (THM-FP) were investigated using Spearman's rank correlation. The F of PARAFAC components, UVA, DOC, and THM-FP were greater in dry season. Chloroform was the primary THM formed at two sites using surface water as their water source, while the site using surface water with saline groundwater intrusion had higher concentration of brominated THMs. Results indicated that F of humic-like components extracted by PARAFAC analysis were the most accurate THM-FP surrogate parameter assessed for the water samples tested and the correlations between F and THM-FP were site specific (ρ = 0.81-0.85). The result demonstrates that fluorescence spectroscopy analysis has yielded insights into relationships between the DOM optical characteristics and their total THM-FP even at sites with different speciation of THMs.
浓度和化学组成的溶解有机质(DOM)在形成和形态的消毒副产物,如三卤甲烷(THMs),在水处理厂(WTPs)在消毒过程中发挥了主要作用。本研究采用荧光激发发射矩阵(EEMs)结合平行因子分析(PARAFAC)对WTPs 工艺过程中的 DOM 进行了特征描述。PARAFAC 模型是由 2018 年 5 月至 2019 年 3 月从泰国孔敬的三个 WTP 采集的 216 个双月水样的 EEM 开发而成。鉴定出三个 PARAFAC 组分分别为来源于陆地、微生物或农业来源的腐殖质样 DOM,而一个蛋白样组分为先前定义的色氨酸样荧光团。利用 Spearman 秩相关分析研究了水质参数与 PARAFAC 组分的最大荧光强度(F)和三卤甲烷生成潜能(THM-FP)之间的关系。在旱季,PARAFAC 组分、UVA、DOC 和 THM-FP 的 F 值较高。在两个使用地表水作为水源的地点,氯仿是主要的三卤甲烷,而一个使用地表水与咸地下水入侵的地点则含有更高浓度的溴化三卤甲烷。结果表明,PARAFAC 分析提取的腐殖质样组分的 F 值是所测试水样中最准确的 THM-FP 替代参数,且 F 与 THM-FP 之间的相关性具有特定的站点特异性(ρ=0.81-0.85)。结果表明,荧光光谱分析深入了解了 DOM 光学特性与其总 THM-FP 之间的关系,即使在具有不同三卤甲烷形态的站点也是如此。