[Discussion of grading method of small opacity profusion of pneumoconiosis on CT scans and the corresponding reference images].

To explore the CT grading method of small opacity profusion of pneumoconiosis, and draw up the corresponding CT reference film. In December 2019, Three hundred thirty-seven cases of pneumoconosis and suspected pneumoconiosis were examined by chest radiography and Computed Tomography (CT) in the same period. According to Diagnosis of Occupational Pneumoconiosis (GBZ 70-2015) , small opacity profusion of pneumoconiosis in each zone of lung was divided. On CT scans, it was divided into 5 grades of 0, 0+, 1, 2 and 3. Grade 0 corresponded to Sub-grade 0/- and Sub-grade 0/0 of Grade 0 in chest radiograph. Grade 0+ was equivalent to Sub-grade 0/1 of Grade 0. Grade 1, 2, 3 were equivalent to Grade 1, 2 and 3, respectively (including each sub-grade) . The CT image quality of each zone of lung was divided into 1 to 4 levels. Results of level 4 were not included in statistical analyses.Based on the results of small opacity profusion in each zone of lung, consistency analysis was performed between chest radiograph and CT. The selection method of reference films was developed. Based on the types and grades of small opacity, the final reference films were determined. There were 1877 zones of lung with CT image quality from level 1 to 3, including 335 in upper right, 319 in middle right, 284 in lower right, 334 in upper left, 320 in middle left and 286 in lower left. The values of small opacity profusion in upper right zone, upper left zone, left middle zone, and lower left zone were all between 0.4-0.75. In middle right zone and lower right zone, they were all above 0.75.Among all 6 zones of lung, the diagnostic concordance rates between CT and chest radiograph were all above 80%.The corresponding CT reference films were proposed, including type p and q in Grade 2 and 3, type r in Grade 2, type s and t in Grade 0+ to 3. The CT grading method for small opacity profusion of pneumoconiosis is feasible, and the application value of its reference films needs to be further verified.