[Integrated multi-column two-dimensional liquid chromatographic system for determination of amisulpride in serum].

Amisulpride is a clinically effective antipsychotic drug. It has been recommended for therapeutic drug monitoring in . An integrated multicolumn two-dimensional liquid chromatography system was constructed. Two reversed-phase columns, Supersil ODS2 (150 mm×4.6 mm, 5 μm) and SinoChrom ODS-BP (150 mm×4.6 mm, 5 μm), with different hydrophobicities were employed in the first and second separation dimensions, respectively. A strong cation-exchange short column, Supersil SCX (10 mm×4.6 mm, 5 μm) was used to trap samples after the first dimensional separation. A two-position six-port valve was applied to change the flow path for transferring the samples. An auxiliary pump was used to change the mobile phase between the first dimensional column and the trapping column. An intact method for analyzing amisulpride in serum was developed using an integrated multicolumn two-dimensional liquid chromatography system. Serum samples were pretreated only by protein precipitation and centrifugation. In the protein precipitation step, a mixture of perchloric acid (6%, v/v) and methanol was used as the precipitation reagent, whose volume was three times that of the serum sample. The use of this reagent helped eliminate the obvious solvent effects resulting from the large injection volume (300 μL). Then, the samples were vortexed for 2 min and centrifuged for 5 min at a velocity of 10000 r/min. The supernatant was injected into the system directly. Acetonitrile/phosphate buffer (25 mmol/L, pH 3.0; 20∶80, v/v) and acetonitrile/phosphate buffer (25 mmol/L, pH 7.0; 25∶75, v/v) were used as mobile phases for the first and second dimensions, respectively, at a flow rate of 1 mL/min. The solvent strength and pH of the first dimensional eluent were adjusted at the two-dimensional chromatographic interface. Phosphate buffer (25 mmol/L, pH 3.0) was supplied at a rate of 1 mL/min by the auxiliary pump for adjustment. The adjustment process allowed amisulpride to remain cationic, thus leading to improved transfer and trapping efficiencies in strong cation-exchange columns, in the heart-cutting mode. The trapping time was determined to be between 4 and 5 min by a confirmation experiment. The use of a short trapping column and the appropriate mobile phase conditions allowed us to complete the analysis within 12 min. The established method was validated in detail by investigating the linearity, limit of detection (LOD), limit of quantification (LOQ), and recovery. A good linear relationship was observed between 10 and 200 ng/mL (=0.9998). The LOD and LOQ were 7.28 ng/mL and 24.27 ng/mL, respectively. The high sensitivity of the validated method met the requirements of the therapeutic reference range of the . The recovery of amisulpride spiked in a serum sample at 50 and 100 ng/mL were stabilized between 73.7% and 76.8%, which revealed the good stability of the established method. As opposed to the complicated traditional analytical methods, our method based on the automated integrated system is cost-effective and low-maintenance, thus being appropriate for routine therapeutic drug monitoring in clinical research. Moreover, our method is highly promising as the system cost is much lower than that of the popular LC-MS, while the capacity is sufficient for the determination of drugs in serum.