Klotzbier Thomas Jürgen, Wollesen Bettina, Vogel Oliver, Rudisch Julian, Cordes Thomas, Jöllenbeck Thomas, Vogt Lutz
Department of Sport and Exercise Science, University of Stuttgart, Allmandring 28, 70569, Stuttgart, Germany.
Department of Human Movement Science, University of Hamburg, Mollerstraße 10, 20148, Hamburg, Germany.
Eur Rev Aging Phys Act. 2021 Aug 3;18(1):17. doi: 10.1186/s11556-021-00271-z.
One reason for the controversial discussion of whether the dual task (DT) walking paradigm has an added value for diagnosis in clinical conditions might be the use of different gait measurement systems. Therefore, the purpose was 1) to detect DT effects of central gait parameters obtained from five different gait analysis devices in young and old adults, 2) to assess the consistency of the measurement systems, and 3) to determine if the absolut and proportional DT costs (DTC) are greater than the system-measurement error under ST.
Twelve old (72.2 ± 7.9y) and 14 young adults (28.3 ± 6.2y) walked a 14.7-m distance under ST and DT at a self-selected gait velocity. Interrater reliability, precision of the measurement and sensitivity to change were calculated under ST and DT.
An age effect was observed in almost all gait parameters for the ST condition. For DT only differences for stride length (p < .029, ɳ = .239) as well as single and double limb support (p = .036, ɳ = .227; p = .034, ɳ = .218) remained. The measurement systems showed a lower absolute agreement compared to consistency across all systems.
When reporting DT effects, the real changes in performance and random measurement errors should always be accounted for. These findings have strong implications for interpreting DT effects.
关于双任务(DT)步行范式在临床诊断中是否具有附加价值的讨论存在争议,原因之一可能是使用了不同的步态测量系统。因此,本研究目的为:1)检测从五种不同步态分析设备获取的年轻和老年成年人的中心步态参数的双任务效应;2)评估测量系统的一致性;3)确定绝对和比例双任务成本(DTC)是否大于单任务(ST)下的系统测量误差。
12名老年人(72.2±7.9岁)和14名年轻人(28.3±6.2岁)以自选步态速度在单任务和双任务条件下行走14.7米的距离。计算单任务和双任务条件下的评分者间信度、测量精度和变化敏感性。
在单任务条件下,几乎所有步态参数均观察到年龄效应。对于双任务,仅步幅(p <.029,η =.239)以及单支撑和双支撑(p =.036,η =.227;p =.034,η =.218)存在差异。与所有系统的一致性相比,测量系统显示出较低的绝对一致性。
在报告双任务效应时,应始终考虑性能的实际变化和随机测量误差。这些发现对解释双任务效应具有重要意义。