Department of Biomaterials and Composites, Faculty of Science and Ceramics, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland.
Instituto de Investigação e Inovação em Saúde (i3S), Rua Alfredo Allen 208, 4200-135 Porto, Portugal.
Int J Mol Sci. 2021 Jul 23;22(15):7897. doi: 10.3390/ijms22157897.
Modular tissue engineering (MTE) is a novel "bottom-up" approach to create engineered biological tissues from microscale repeating units. Our aim was to obtain microtissue constructs, based on polymer microspheres (MSs) populated with cells, which can be further assembled into larger tissue blocks and used in bone MTE. Poly(L-lactide--glycolide) MS of 165 ± 47 µm in diameter were produced by oil-in-water emulsification and treated with 0.1 M NaOH. To improve cell adhesion, MSs were coated with poly--lysine (PLL) or human recombinant collagen type I (COL). The presence of oxygenated functionalities and PLL/COL coating on MS was confirmed by X-ray photoelectron spectroscopy (XPS). To assess the influence of medium composition on adhesion, proliferation, and osteogenic differentiation, preosteoblast MC3T3-E1 cells were cultured on MS in minimal essential medium (MEM) and osteogenic differentiation medium (OSG). Moreover, to assess the potential osteoblast-osteoclast cross-talk phenomenon and the influence of signaling molecules released by osteoclasts on osteoblast cell culture, a medium obtained from osteoclast culture (OSC) was also used. To impel the cells to adhere and grow on the MS, anti-adhesive cell culture plates were utilized. The results show that MS coated with PLL and COL significantly favor the adhesion and growth of MC3T3-E1 cells on days 1 and 7, respectively, in all experimental conditions tested. On day 7, three-dimensional MS/cell/extracellular matrix constructs were created owing to auto-assembly. The cells grown in such constructs exhibited high activity of early osteogenic differentiation marker, namely, alkaline phosphatase. Superior cell growth on PLL- and COL-coated MS on day 14 was observed in the OSG medium. Interestingly, deposition of extracellular matrix and its mineralization was particularly enhanced on COL-coated MS in OSG medium on day 14. In our study, we developed a method of spontaneous formation of organoid-like MS-based cell/ECM constructs with a few millimeters in size. Such constructs may be regarded as building blocks in bone MTE.
模块化组织工程(MTE)是一种新颖的“自下而上”方法,用于从微尺度重复单元创建工程化生物组织。我们的目的是获得基于聚合物微球(MS)的微组织构建体,这些微球中填充有细胞,可以进一步组装成更大的组织块,并用于骨 MTE。通过油包水乳液法制备直径为 165±47μm 的聚(L-丙交酯-乙交酯)MS,并使用 0.1M NaOH 处理。为了提高细胞黏附性,将 MS 涂覆以聚-赖氨酸(PLL)或人重组胶原 I 型(COL)。通过 X 射线光电子能谱(XPS)确认 MS 上存在含氧官能团和 PLL/COL 涂层。为了评估培养基成分对黏附、增殖和成骨分化的影响,将前成骨细胞 MC3T3-E1 细胞在最小必需培养基(MEM)和成骨分化培养基(OSG)中培养在 MS 上。此外,为了评估破骨细胞释放的信号分子对成骨细胞培养的潜在成骨细胞-破骨细胞交叉对话现象的影响,还使用了从破骨细胞培养物(OSC)获得的培养基。为了促使细胞黏附并在 MS 上生长,使用了抗黏附细胞培养板。结果表明,在所有测试的实验条件下,涂覆 PLL 和 COL 的 MS 分别在第 1 天和第 7 天显著促进 MC3T3-E1 细胞的黏附和生长。在第 7 天,由于自动组装,创建了三维 MS/细胞/细胞外基质构建体。在这样的构建体中生长的细胞表现出高的早期成骨分化标志物碱性磷酸酶的活性。在 OSG 培养基中,在第 14 天观察到 PLL 和 COL 涂覆的 MS 上细胞生长更好。有趣的是,在第 14 天的 OSG 培养基中,COL 涂覆的 MS 上细胞外基质的沉积及其矿化特别增强。在本研究中,我们开发了一种自发形成毫米级大小的类器官样 MS 为基础的细胞/细胞外基质构建体的方法。这种构建体可以被视为骨 MTE 的构建块。