Banierink Hester, Meesters Anne M L, Ten Duis Kaj, Doornberg Job N, El Moumni Mostafa, Heineman Erik, Reininga Inge H F, IJpma Frank F A
Department of Trauma Surgery, University Medical Center Groningen, University of Groningen, 9713 GZ Groningen, The Netherlands.
Department of Orthopedics, University Medical Center Groningen, University of Groningen, 9713 GZ Groningen, The Netherlands.
J Pers Med. 2021 Sep 18;11(9):930. doi: 10.3390/jpm11090930.
There has been an exponential growth in the use of advanced technologies for three-dimensional (3D) virtual pre- and intra-operative planning of pelvic ring injury surgery but potential benefits remain unclear. The purpose of this study was to evaluate differences in intra- and post-operative results between 3D and conventional (2D) surgery. A systematic review was performed including published studies between 1 January 2010 and 22 May 2020 on all available 3D techniques in pelvic ring injury surgery. Studies were assessed for their methodological quality according to the Modified McMaster Critical Review form. Differences in operation time, blood loss, fluoroscopy time, screw malposition rate, fracture reduction and functional outcome between 3D-assisted and conventional (2D) pelvic injury treatment were evaluated and a best-evidence synthesis was performed. Eighteen studies fulfilled the inclusion criteria, evaluating a total of 988 patients. Overall quality was moderate. Regarding intra-operative results of 3D-assisted versus conventional surgery: The weighted mean operation time per screw was 43 min versus 52 min; for overall operation time 126 min versus 141 min; blood loss 275 ± 197 mL versus 549 ± 404 mL; fluoroscopy time 74 s versus 125 s and fluoroscopy frequency 29 ± 4 versus 63 ± 3. In terms of post-operative outcomes of 3D-assisted versus conventional surgery: weighted mean screw malposition rate was 8% versus 18%; quality of fracture reduction measured by the total excellent/good rate by Matta was 86% versus 82% and Majeed excellent/good rate 88% versus 83%. The 3D-assisted surgery technologies seem to have a positive effect on operation time, blood loss, fluoroscopy dose, time and frequency as well as accuracy of screw placement. No improvement in clinical outcome in terms of fracture reduction and functional outcome has been established so far. Due to a wide range of methodological quality and heterogeneity between the included studies, results should be interpreted with caution.
用于骨盆环损伤手术的三维(3D)虚拟术前和术中规划的先进技术的使用呈指数级增长,但潜在益处仍不明确。本研究的目的是评估3D手术与传统(2D)手术在术中和术后结果上的差异。进行了一项系统评价,纳入了2010年1月1日至2020年5月22日发表的关于骨盆环损伤手术中所有可用3D技术的研究。根据改良的麦克马斯特批判性评价表评估研究的方法学质量。评估了3D辅助与传统(2D)骨盆损伤治疗在手术时间、失血量、透视时间、螺钉位置不当率、骨折复位和功能结果方面的差异,并进行了最佳证据综合分析。18项研究符合纳入标准,共评估了988例患者。总体质量中等。关于3D辅助手术与传统手术的术中结果:每颗螺钉的加权平均手术时间为43分钟对52分钟;总体手术时间为126分钟对141分钟;失血量为275±197毫升对549±404毫升;透视时间为74秒对125秒,透视频率为29±4对63±3。在3D辅助手术与传统手术的术后结果方面:加权平均螺钉位置不当率为8%对18%;通过Matta的总优/良率衡量的骨折复位质量为86%对82%,Majeed优/良率为88%对83%。3D辅助手术技术似乎对手术时间、失血量、透视剂量、时间和频率以及螺钉置入的准确性有积极影响。迄今为止,在骨折复位和功能结果方面尚未证实临床结果有改善。由于纳入研究之间方法学质量和异质性范围广泛,结果应谨慎解释。